Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Betonbor Bosch SDS-Quick 1cm 120mm

Betonbor Bosch SDS-Quick 1cm 120mm
Betonbor Bosch SDS-Quick 1cm 120mm
Betonbor Bosch SDS-Quick 1cm 120mm
Betonbor Bosch SDS-Quick 1cm 120mm
153,31 kr.
PDF
PDF
Lagerstatus Ikke på lagerIkke på lager Produktkode 2553931 Model 2609256907 Garanti 2 år

Levering & returnering

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

Concrete drill bit with SDS‑Quick shank for rotary hammers, diameter 1 cm and overall length 120 mm. The drill bit is intended for positioning fixings and for drilling into hard materials such as hard concrete, natural stone, artificial stone and masonry. The tungsten carbide tip is hammer‑resistant to provide long life and consistent drilling performance. The SDS‑Quick shank fits Uneo / Uneo Maxx and can also be used in conventional three‑jaw chucks for high torque transmission.

Advantages

High drilling performance combined with a hammer‑resistant tungsten carbide tip ensures efficient penetration in dense materials. The SDS‑Quick shank allows fast, secure tool changes and transmits torque effectively in both SDS‑Quick compatible tools and traditional three‑jaw chucks. Compact dimensions (1 cm × 120 mm) make the bit suitable for confined spaces and precise fixing installation.

Suitable for

Key specifications

How to use

Secure the drill bit in the appropriate chuck (SDS‑Quick or three‑jaw chuck). Select a rotary hammer mode suitable for percussion drilling if the base material is concrete or masonry. Position the bit on the marked point, start drilling with light pressure to establish the hole, then increase pressure steadily while keeping the drill perpendicular to the surface. Remove dust from the hole before inserting anchors or fixings to ensure correct seating and load capacity.

Recommendations

Use appropriate personal protective equipment (safety glasses, ear protection and dust mask) and follow the tool manufacturer's guidance for speed and hammer settings. For best results in very hard concrete, use short drilling intervals and withdraw the bit periodically to clear debris and avoid overheating.
Vigtigste egenskaber
  • Drilling fixing holes in hard concrete
  • Fixings in natural and artificial stone
  • Masonry drilling for anchors and dowels
  • Use with Uneo / Uneo Maxx and three‑jaw chucks
  • Brand: Bosch
  • Model / MPN: 2609256907
  • EAN: 3165140480734
  • Shank type: SDS‑Quick
  • Diameter: 1 cm (10 mm)
  • Total length: 120 mm
  • Material tip: Tungsten carbide, hammer‑resistant
  • Pack quantity: 1 piece

Specifikationer

Specifikationer
Antal bor
1 pc(s)
Arbejdslængde
70 mm
Bordiameter
10 mm
Egnet til materialer
Beton
Længde
120 mm
Skaftform
SDS-Quick
Tilsigtet brug
Borehammer
Prishistorik for de seneste 6 måneder
Betonbor Bosch SDS-Quick 1cm 120mm
Aktuel
153,31 kr.
Laveste 7 d.
151,39 kr.
Højeste 7 d.
153,31 kr.
Ændring 24 timer
+1,90 kr.   +1%
Ændring 7 d.
+1,89 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BOSCH-produkter i denne kategori

12

Populære produkter i denne kategori

4
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier