Bosch Expert SDS plus-7X hammerbor

The Bosch Expert SDS plus-7X Hammer Drill Bit is engineered for rotary hammers and intended for drilling in concrete and reinforced concrete. With a 1.4 cm diameter and a full-carbide, four-cutter head manufactured from a single piece of carbide, the bit resists jamming in rebar and withstands impact, offering extended lifetime and consistent drilling performance for professional and demanding applications.

Advantages

The full-carbide, 4-cutter head provides improved durability and impact resistance compared with conventional two-cutter bits. The single-piece carbide construction eliminates weak points that can cause breakage when hitting reinforcement. The SDS plus shank ensures secure retention and fast bit changes in compatible rotary hammer drills. Designed for heavy-duty use, the bit maintains drilling speed and precision in concrete and masonry.

Suitable for

• Drilling holes in reinforced concrete for anchors and fixings
• Installation work on construction sites using SDS plus rotary hammers
• Heavy-duty concrete and masonry drilling where long life and reliability are required

Key specifications

• Brand: Bosch
• Model: Expert SDS plus-7X (MPN 2608900123)
• EAN: 4059952531960
• Shank type: SDS plus
• Tip: Full carbide, 4-cutter head
• Diameter: 1.4 cm
• Application: Concrete, reinforced concrete, masonry

How to use

Fit the bit into an SDS plus rotary hammer chuck until it locks. Select the hammer drilling mode and use appropriate drilling speed and pressure for the material. Start drilling with steady axial force; avoid excessive lateral pressure. If reinforcement is encountered, maintain steady feed and allow the bit to cut through without forcing; withdraw periodically to clear dust and debris. After use, remove the bit and clean the carbide head and shank before storage.

Recommendations

Use suitable personal protective equipment (safety glasses, gloves, hearing protection) and a dust extraction system or vacuum when drilling concrete. Match drill diameter and length to anchor or fixing specifications and use an appropriate power tool with SDS plus compatibility.