141,98 kr.
Ekskl. moms:113,58 kr.
237,08 kr.
Ekskl. moms:189,66 kr.
Mærke: LC RACING
Lager: 2
Lightweight gear diff outdrives, supplied in a pack of two pieces, designed as a spare part for the LC10B5 and PTG-1 RC models.In the box2× Gear Diff ..
145,92 kr.
Ekskl. moms:116,74 kr.
Mærke: KILLERBODY
Lager: 3
This ABS parts kit consists of a grille cover, the inner part of the grille cover, Freedom Top (R), and a built-in roll cage protection. It is suitabl..
141,68 kr.
Ekskl. moms:113,35 kr.
Mærke: KILLERBODY
Lager: 3
This center stack is suitable for the Killerbody 1/10 scale Jeep Gladiator Rubicon hard body kit (KB48765).Brand: Killerbody..
141,68 kr.
Ekskl. moms:113,35 kr.
Mærke: KILLERBODY
Lager: 5
These transparent windows are suitable for the 1/10 Jeep Gladiator Rubicon hard body kit KB48765.Brand: Killerbody..
141,68 kr.
Ekskl. moms:113,35 kr.
Mærke: LC RACING
Lager: 2
This rear fiber composite shock tower is a spare part used in the PTG-2 and PTG-2R.Brand: LC Racing..
141,54 kr.
Ekskl. moms:113,23 kr.
Mærke: LC RACING
Lager: 5
This clear chassis mud cover is a spare part designed for the LC Racing PTG-2 and PTG-2R chassis.Brand: LC Racing..
140,08 kr.
Ekskl. moms:112,06 kr.
Mærke: ROBITRONIC
Lager: 6
This set contains two grey bucket seats made of soft rubber, with a seat height of approx. 80 mm, a seat length of approx. 55 mm and a seat width of a..
137,45 kr.
Ekskl. moms:109,96 kr.
Mærke: MODSTER
Lager: 20
This set consists of two ready-to-run tyres on rims in 1/10 scale for Truggies, with a diameter of 107 mm and a width of 55 mm.Tyres/rims for 1/10 Tru..
136,72 kr.
Ekskl. moms:109,37 kr.
Mærke: AXE
Lager: 20
Standard R5 very cold glow plug from Axe Rossi, designed for most nitro-powered engines with a standard combustion chamber.This high-quality plug feat..
134,83 kr.
Ekskl. moms:107,86 kr.
Mærke: AXE
Lager: 6
This medium turbo glow plug from Axe Rossi is designed for nitro powered engines with a turbo combustion chamber.It features a precisely produced thre..
131,86 kr.
Ekskl. moms:105,49 kr.
Mærke: POWER HD
Lager: 20
This analog standard servo features a DC motor, plastic gears, and dual ball bearings. It delivers a torque of 5.8 kg-cm at 4.8V and 6.7 kg-cm at 6.0V..
129,19 kr.
Ekskl. moms:103,35 kr.
Mærke: PR RACING
Lager: 1
1/10 Front Shock Springs - Transparent (2pcs) 0.053kg/mmBrand: PR Racing..
128,30 kr.
Ekskl. moms:102,64 kr.
Mærke: PR RACING
Lager: 1
1/10 Rear Shock Springs - Blue (2pcs) 0.035kg/mm For Type RBrand: PR Racing..
128,30 kr.
Ekskl. moms:102,64 kr.
Mærke: PR RACING
Lager: 1
Brand: PR Racing1/10 Rear Shock Springs - Transparent (2pcs)0.030 kg/mm..
128,30 kr.
Ekskl. moms:102,64 kr.
Mærke: MODSTER
Lager: 20
This compact servo tester from MODSTER supports an input voltage of DC 4.8-6V and a pulse length of 800-2200µs, allowing up to 4 servos to be connecte..
128,89 kr.
Ekskl. moms:103,11 kr.
Mærke: PR RACING
Lager: 1
1/10 Rear Shock Springs - Black (2pcs) 0.055kg/mm For Type RBrand: PR Racing..
128,30 kr.
Ekskl. moms:102,64 kr.
Mærke: PR RACING
Lager: 1
SB401 Slipper Spring (Aluminum Harden) *1pcsBrand: PR Racing..
128,30 kr.
Ekskl. moms:102,64 kr.
Mærke: KILLERBODY
Lager: 9
These running boards for the left and right sides have tread plates made of ribbed stainless steel sheet and are suitable for the Killerbody Toyota LC..
126,96 kr.
Ekskl. moms:101,57 kr.
Mærke: ROBITRONIC
Lager: 6
This small plastic replacement compartment for the R14002 bag is made of robust, durable plastic and can be easily washed out or degreased when dirty...
169,04 kr.
Ekskl. moms:135,23 kr.
Mærke: PR RACING
Lager: 6
Brand: PR RacingSteering Knuckle Bushing 2.3mm (aluminum) +0.8mm (steel) 2pcs..
125,48 kr.
Ekskl. moms:100,38 kr.
Mærke: PR RACING
Lager: 2
Rear Pillar Carbon Signature Versatile 2.5mm 1pcsBrand: PR Racing..
125,48 kr.
Ekskl. moms:100,38 kr.
Mærke: PR RACING
Lager: 3
Slipper Clutch Spring 3.6kg/mm for SB401R 2pcsBrand: PR Racing..
125,48 kr.
Ekskl. moms:100,38 kr.
Mærke: PR RACING
Lager: 1
These machined front shock pistons feature 1.8mm holes to provide improved bump handling and landing jumps, performing extremely well on outdoor track..
125,48 kr.
Ekskl. moms:100,38 kr.
Mærke: LC RACING
Lager: 4
Aluminum shock spring retaining collars in a two-piece set, suitable as a spare part for the LC10B5 and PTG-1 models.In the box2× Shock Spring Retaini..
124,44 kr.
Ekskl. moms:99,55 kr.
Mærke: KILLERBODY
Lager: 8
This unpainted chassis protective cover made from 0.5 mm thick polycarbonate fits the Mugen Seiki 1/8 Buggy, such as the MBX-6, and is supplied with i..
124,14 kr.
Ekskl. moms:99,31 kr.
Mærke: ROBITRONIC
Lager: 20
This durable aluminium double servo arm features a red finish and 24Z spline. It includes small side screws to optimize mounting on the servo main sha..
121,95 kr.
Ekskl. moms:97,56 kr.
Mærke: PR RACING
Lager: 2
These green 1/10 front shock springs for the Type R are about 45 mm long with a spring rate of 0.067 kg/mm, total dimensions of 1.3 x 19 x 44.5 x 9-1/..
119,09 kr.
Ekskl. moms:95,27 kr.
Mærke: LC RACING
Lager: 2
This front fiberglass shock tower is a spare part used in the PTG-2 and PTG-2R.Brand: LC Racing..
117,56 kr.
Ekskl. moms:94,05 kr.
Mærke: ROBITRONIC
Lager: 7
This Module 1 pinion with 19 teeth is designed for 1/8 scale motors with a 5mm shaft. Made of hardened steel to withstand heavy brushless motors, it f..
117,56 kr.
Ekskl. moms:94,05 kr.
Mærke: LC RACING
Lager: 4
This steel bevel drive gear with shaft and outdrive is a spare part designed for use in the LC Racing PTG-2 and PTG-2R models.Brand: LC Racing..
117,56 kr.
Ekskl. moms:94,05 kr.
Mærke: SKYRC
Lager: 20
This chassis droop gauge allows you to measure positive and negative chassis droop correctly and precisely to optimize chassis rolling and weight bala..
117,56 kr.
Ekskl. moms:94,05 kr.
Mærke: EDS
Lager: 1
0.063 (1/16") hex wrench with a 120 mm spring-steel tipThis hex wrench with a 0.063 (1/16") inch tip is made of high-quality spring steel to provide e..
116,20 kr.
Ekskl. moms:92,96 kr.
Mærke: POWER HD
Lager: 15
This analog servo features copper gears, a DC motor, and operates on a voltage range of 4.8 to 6.0 DC Volts. Measuring 23.0 x 12.2 x 27.5 mm and weigh..
116,07 kr.
Ekskl. moms:92,85 kr.
Mærke: ROBITRONIC
Lager: 5
This differential box front or rear v2 must be used in combination with R33132 and is not compatible with R33126. Upgrading to the v2 version also req..
111,30 kr.
Ekskl. moms:89,04 kr.
Mærke: LC RACING
Lager: 4
These aluminum rear shock bodies are official spare parts designed for the LC Racing LC10B5 and PTG-1 models.Rear aluminium shock bodies for LC10B5 an..
110,69 kr.
Ekskl. moms:88,55 kr.
Mærke: LC RACING
Lager: 4
Aluminum front shock bodies for LC Racing models, designed as a spare part for use in the LC10B5 and PTG-1.In the box2× Front shock body AluBrand: LC ..
110,69 kr.
Ekskl. moms:88,55 kr.
Mærke: HOBBYWING
Lager: 17
HOBBYWING Ball Bearing for Xerun 1/10 Motor 3.175x9.525x3.967mm Brand: Hobbywing Manufacturer: HOBBYWING..
108,53 kr.
Ekskl. moms:86,82 kr.
Mærke: KILLERBODY
Lager: 3
Brand: KillerbodyLexan plate carbon fibre look (203 x 305 x 1.5 mm)..
108,37 kr.
Ekskl. moms:86,70 kr.
Mærke: ROBITRONIC
Lager: 3
ROBITRONIC Spur Gear 48dp 81T machined for Xray T2 008/09 Brand: Robitronic Manufacturer: ROBITRONIC..
107,60 kr.
Ekskl. moms:86,08 kr.
Mærke: MUCH MORE
Lager: 6
MUCH MORE Motor Endbell Fan Posts Type 2 (25x25 Fan size.) Brand: Much More Manufacturer: MUCH MORE..
107,60 kr.
Ekskl. moms:86,08 kr.
Mærke: FLYSKY
Lager: 20
This optical RPM sensor measures a speed range of 0 to 60,000 RPM, weighs 6.8g, and features an i.bus data port, making it compatible with several Fly..
107,45 kr.
Ekskl. moms:85,96 kr.
Mærke: HOBBYWING
Lager: 12
This frameless 25 x 25 x 10 mm cyclone fan utilizes Hobbywing's patented cooling design to generate superior airflow while maintaining low energy cons..
104,51 kr.
Ekskl. moms:83,61 kr.
Mærke: MODSTER
Lager: 3
This canopy is a suitable spare part for the MODSTER Trip 1800 mm model.Canopy for the MODSTER Trip 1800 mm.Brand: Modster..
101,43 kr.
Ekskl. moms:81,14 kr.
Mærke: SKYRC
Lager: 20
This black ride height gauge from SkyRC allows you to measure the clearance between the chassis bottom and the ground, directly affecting traction, ch..
101,27 kr.
Ekskl. moms:81,02 kr.
Mærke: ROBITRONIC
Lager: 3
This 16T pinion gear features a 64dp pitch, a 3.17mm bore, and is supplied with an M2.5 set screw with a 1.3mm hex head.Pinion with 64dp pitch, 16T an..
99,88 kr.
Ekskl. moms:79,91 kr.
Mærke: ROBITRONIC
Lager: 12
This 18T pinion gear with a 64dp pitch and a 3.17mm bore includes an M2.5 set screw with a 1.3mm hex.Robitronic 64dp 18T pinion with 3.17 mm bore.Spec..
99,88 kr.
Ekskl. moms:79,91 kr.
Mærke: KOPROPO
Lager: 1
This replacement throttle pad set with anti-slip function is designed for the EX-NEXT LDT remote control, containing a black trigger pad for throttle ..
95,93 kr.
Ekskl. moms:76,75 kr.
Mærke: MODSTER
Lager: 2
This set for the Dune Racer Pro contains one servo arm and four servo arm mounts.Servo arm set for Dune Racer Pro.In the box1× Servo arm4× Servo arm m..
95,46 kr.
Ekskl. moms:76,37 kr.
Mærke: MODSTER
Lager: 20
The MODSTER XC-Maximum is a practical motor cooler with an integrated fan.Motor cooler with fan for MODSTER XC-Maximum.Brand: Modster..
94,35 kr.
Ekskl. moms:75,48 kr.
Mærke: MODSTER
Lager: 20
This spare part is the rear upper chassis plate for the MODSTER XC-Maximum.Brand: Modster..
94,35 kr.
Ekskl. moms:75,48 kr.