Microconnect HDMI High Speed fladkabel, 1 m

The MicroConnect HDMI HDM19191V1.4FLAT 1m is a High Speed HDMI 1.4 flat cable with HDMI Type A male connectors on both ends. It supports data transfer rates up to 10.2 Gbit/s and resolutions up to 3840 x 2160 (4K) at 30 Hz, with support for 3D, HDCP 2.2, CEC and Audio Return Channel (ARC). The flat design and compact connectors allow installation in tight spaces and make the cable suitable for routing under carpets or behind baseboards.

Advantages

The flat construction simplifies cable management and helps hide the cable under floor coverings or along skirting boards. Gold-plated contacts ensure stable signal transmission and reduced corrosion. Compliance with HDMI 1.4 specifications provides compatibility with 3D content, ARC functionality and CEC control between connected devices.

Suitable for

• Connecting Blu-ray players, set-top boxes or game consoles to TVs or monitors
• Home theater setups requiring ARC for audio return
• Installing in tight spaces, under carpets or behind baseboards
• Transmitting 4K@30Hz video and 3D signals

Key specifications

• Model: MicroConnect HDM19191V1.4FLAT
• Length: 1 m
• Connectors: HDMI Type A male — both ends
• HDMI version: 1.4
• Maximum data rate: 10.2 Gbit/s
• Maximum resolution: 3840 x 2160 (4K) @ 30 Hz
• Features: 3D, HDCP 2.2, CEC, ARC
• Contacts: gold-plated
• Colour: Black
• Weight: 0.078 kg

How to use

Connect one HDMI Type A male connector to the HDMI output of the source device (for example a Blu-ray player, game console or set-top box) and the other connector to the HDMI input on the display (TV or monitor). Ensure connectors are fully inserted to secure the connection. Route the flat cable through tight gaps or beneath carpets as needed, avoiding sharp bends at the connector ends.

Recommendations

For best performance, avoid excessive bending and prolonged pressure on the flat cable. If using under carpets, ensure the cable is not placed under heavy furniture legs or where it may be pinched. Keep the connectors clean and insert/remove by the connector housing rather than pulling the cable itself.