Wire connector RJ-45 Lanberg PLU-5020

Wire connector RJ-45 Lanberg PLU-5020 is a pack of 20 transparent RJ-45 (8P8C) Cat5e unshielded connectors designed for UTP LAN cables. The connectors are compatible with both solid and stranded Ethernet conductors thanks to their triple-tooth contact design, providing reliable terminations for structured cabling and short patch leads.

Advantages

The triple-prong contact design enables secure connections with both solid and stranded conductors. Transparent housing allows visual inspection of conductor alignment. Pack of 20 provides enough connectors for multiple installations or repairs.

Suitable for

Key specifications

How to use

Strip the cable jacket to the recommended length, arrange conductors according to the chosen wiring scheme (T568A or T568B), and insert the wires fully into the connector so the conductors reach the front. Use a suitable crimping tool to press the connector and embed the contacts into the conductors. Verify the connection visually and test with a cable tester if available.

Recommendations

For consistent results use a crimping tool compatible with RJ-45 8P8C plugs, adhere to standard wiring schemes, and avoid excessive cable jacket removal. Use these connectors with Cat5e UTP cables; for shielded or higher-category applications consider appropriate shielded plugs or higher-category connectors.