3D-printmateriale ABS Creality 3D 3301020040

Creality 3D 3301020040 ABS filament in white is a 1 kg roll of thermoplastic material designed for fused filament fabrication. ABS (Acrylonitrile Butadiene Styrene) offers impact resistance and dimensional stability for parts that require toughness and moderate heat resistance. The filament is supplied in a single pack and is compatible with Creality 3D printers, fitting typical desktop FDM/FFF workflows where a durable, machinable material is needed. The package dimensions of 450 mm by 440 mm facilitate storage and transport.

Advantages

ABS provides a balance of strength, stiffness and toughness that makes it suitable for functional prototypes and end-use parts. It responds well to post-processing such as sanding, drilling and acetone smoothing to improve surface finish and dimensional accuracy. The material’s thermal properties allow printed parts to withstand higher temperatures than common PLA, and its mechanical resilience supports applications requiring impact resistance.

Suitable for

• Functional prototypes and mechanical parts
• Enclosures, brackets and fixtures
• Models requiring post-processing and surface smoothing
• Applications needing moderate heat resistance

Key specifications

• Material type: ABS (Acrylonitrile Butadiene Styrene)
• Colour: White
• Net weight: 1 kg
• Form: Filament spool for FDM/FFF 3D printers
• Compatibility: Designed for Creality 3D desktop printers and generally compatible with similar FDM/FFF machines
• Packaging dimensions: 450 mm (width) × 440 mm (depth)

How to use

Load the ABS filament onto a compatible extruder and set printer parameters appropriate for ABS: typical nozzle temperature ranges from 230–260°C and bed temperature from 80–110°C depending on printer and model geometry. Use an enclosed chamber or draft-free environment to minimize warping and layer separation. Calibrate retraction, print speed and cooling settings for the best balance of surface quality and dimensional accuracy. After printing, allow parts to cool gradually on the build plate before removal.

Recommendations

For improved adhesion and reduced warping, use a heated bed with a suitable build surface such as polycarbonate sheet, ABS slurry, or adhesive tape. When fine surface finish is required, perform light sanding followed by controlled acetone vapor smoothing in a well-ventilated area and with appropriate personal protective equipment.