Antari ICE-101 bundtågemaskine med flightcase 20000368

Creating a dense, ground-hugging fog effect for stages, events, or theatrical productions often requires bulky equipment and complex setups. The Antari ICE-101 Low-Lying Fog Machine solves this by combining a powerful 1000 W heater with an integrated ice chamber, delivering a thick, low-lying fog that stays close to the floor without the need for dry ice or external cooling systems. Packaged in a rugged flight case, it is ready for transport and professional use.

Who is it for

This machine is ideal for event technicians, stage designers, DJs, and production companies that need reliable low-fog effects for concerts, theater, film sets, or themed environments. Its portable design and included flight case make it suitable for touring and rental operations.

Main features

• 1000 W heater with approximately 8-minute warm-up time for quick deployment.
• 2.5-liter fluid tank and 2.5 kg ice chamber capacity for extended operation.
• High output volume of 10,000 cu.ft/min (283 m³/min) for large-area coverage.
• Multiple control options: DMX512 (1 channel), included Antari Z-8 wired remote, and manual control.
• Durable metal housing in black/silver finish, with thermal cut-off and low-fluid sensor for safety.
• Supplied with a custom flight case for protection and easy transport.

Specifications

• Heater power: 1000 W
• Warm-up time: approx. 8 minutes
• Fluid tank capacity: 2.5 liters
• Fluid consumption: 40 ml/min at 100% output
• Ice chamber capacity: 2.5 kg (standard ice cubes)
• Output volume: 10,000 cu.ft/min (283 m³/min)
• Control: DMX512, wired remote, manual
• DMX channels: 1
• Remote control: Antari Z-8 wired remote (included)
• Power supply: AC 230 V, 50 Hz
• Max power consumption: 1000 W
• Housing material: metal
• Fog output direction: front
• Recommended fluid: Antari FLR / FLG fog fluid
• Connectivity: 3-pin XLR (DMX in/out), 6.3 mm jack (remote)
• Safety features: thermal cut-off, low-fluid sensor
• Operating temperature: 0°C - 40°C
• Colour: black / silver
• Included accessories: flight case

Tips

Use standard ice cubes in the chamber to cool the fog and keep it low to the ground. For best results, use Antari FLR or FLG fluid and ensure the machine is placed on a level surface. Always allow the machine to cool down before packing it into the flight case after use.