Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

InfiniBand-kabel CBO J9284D-BL 5 m SFP+ sort

InfiniBand-kabel CBO J9284D-BL 5 m SFP+ sort
60 md.
InfiniBand-kabel CBO J9284D-BL 5 m SFP+ sort
563,76 kr.
PDF
PDF
Lagerstatus 1 Produktkode 1474814 Model J9284D-BL Garanti 5 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

Passive InfiniBand cable CBO J9284D-BL is a 5 m SFP+ cable in black designed to connect compatible SFP+ ports for high-speed data links in networking, storage and server environments. The cable supports short to medium distance rack-to-rack or device-to-device connections, delivering a simple, low-latency physical link between SFP+ transceivers without requiring active components or external power.

Advantages

This passive SFP+ InfiniBand cable provides a direct, low-latency connection suitable for dense top-of-rack and in-rack deployments. The 5 m length offers flexibility for common server and switch placements while avoiding signal conversion overhead. Its passive construction reduces power consumption compared with active optics and minimizes points of failure by keeping the physical link straightforward. The black jacket provides a discreet and professional appearance in rack installations.

Suitable for

Key specifications

How to use

Ensure both devices have compatible SFP+ ports and that the ports support passive twinax direct-attach cables. Power down or follow hot-swap guidelines of your equipment if required by the vendor, then insert each SFP+ connector into the corresponding port until it latches. Route the cable to avoid sharp bends and to maintain appropriate airflow in the rack. After insertion, verify link status through device LEDs or management interfaces to confirm the connection is active and operating at the expected speed.

Recommendations

Use this passive 5 m SFP+ InfiniBand twinax cable for in-rack and short rack-to-rack connections where low latency and low power consumption are priorities. Avoid running the cable near strong electromagnetic interference sources and maintain bend radii consistent with connector and cable manufacturer guidance to preserve signal integrity.

Vigtigste egenskaber
  • Connecting SFP+ ports between servers, switches and storage arrays within racks
  • Short to medium rack-to-rack links in data centers
  • High-throughput, low-latency links for HPC and clustered environments
  • Temporary or permanent device-to-device connections where optical transceivers are not required
  • Connector type: SFP+ compatible twinax (passive) cable
  • Length: 5 meters
  • Color: black jacket
  • Application: InfiniBand / SFP+ high-speed direct attach
  • Latency: passive direct-attach low-latency link
  • Power: no external power required (passive)
  • Typical use: short to medium distance rack and device interconnects

Specifikationer

Specifikationer
Kabellængde
5 m
Tilslutning 1
SFP+
Tilslutning 2
SFP+
Prishistorik for de seneste 6 måneder
InfiniBand-kabel CBO J9284D-BL 5 m SFP+ sort
Aktuel
563,76 kr.
Laveste 7 d.
555,71 kr.
Højeste 7 d.
564,36 kr.
Ændring 24 timer
0,00 kr.   0%
Ændring 7 d.
+8,05 kr.   +1%
Ændring 30 d.
-3,61 kr.   -1%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

7
Sælger: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier