Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Bor Bosch SDS max-4 2608685863

Bor Bosch SDS max-4 2608685863
Bor Bosch SDS max-4 2608685863
Bor Bosch SDS max-4 2608685863
Bor Bosch SDS max-4 2608685863
Bor Bosch SDS max-4 2608685863
Bor Bosch SDS max-4 2608685863
388,78 kr.
PDF
PDF
Lagerstatus 9 Produktkode 2396189 Model 2 608 685 863 Garanti 2 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Beskrivelse

SDS max-4 Drill Bits Bosch 2608685863 are designed for heavy-duty drilling in concrete and masonry. The bit features a four-cutter head and a two-flute U-shaped body to improve dust removal and reduce jamming when encountering rebar. Its carbide tip and robust construction deliver extended service life and consistent performance when used in SDS max rotary hammers.

Advantages

The SDS max-4 geometry provides stable cutting and reduces the risk of bit jamming on reinforcement. The two-flute U-shaped profile enhances dust evacuation from the hole, lowering friction and wear. A highly durable carbide tip resists abrasion for prolonged life in concrete and masonry applications. The bit is compatible with all rotary hammers that accept SDS max holders.

Suitable for

Key specifications

How to use

Install the bit into an SDS max rotary hammer according to the tool manufacturer's instructions and secure it in the chuck. Start drilling at low speed to position the hole, then apply steady pressure and run at the recommended speed for the rotary hammer and bit size. For best performance, periodically clear dust from the hole or use the hammer's blow-out function. Avoid excessive side loads to prevent premature wear of the carbide tip.

Recommendations

Use appropriate personal protective equipment (safety glasses, dust mask, hearing protection) and follow jobsite safety procedures. For long holes or heavy-duty work, use progressive drilling and remove dust frequently to extend bit life.
Vigtigste egenskaber
  • Drilling holes in concrete
  • Masonry drilling (brick, block)
  • Worksites using SDS max rotary hammers
  • Occasional contact with rebar during demolition or renovation
  • Brand: Bosch
  • Model / MPN: 2608685863
  • Shank type: SDS max
  • Tip material: Carbide
  • Design: 4-cutter head, 2-flute U-shaped body
  • Primary use: Concrete and masonry
  • EAN: 3165140564144

Specifikationer

Specifikationer
Antal bor
1 pc(s)
Arbejdslængde
40 cm
Bordiameter
1.8 cm
Egnet til materialer
Mursten, beton
Længde
540 mm
Skaftform
SDS Max
Tilsigtet brug
Borehammer

Brochure

Åbn Brochure
Prishistorik for de seneste 6 måneder
Bor Bosch SDS max-4 2608685863
Aktuel
388,78 kr.
Laveste 7 d.
388,78 kr.
Højeste 7 d.
401,41 kr.
Ændring 24 timer
-0,02 kr.   0%
Ændring 7 d.
-6,88 kr.   -2%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BOSCH-produkter i denne kategori

12

Populære produkter i denne kategori

4
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier