Bor KWB 261516

The KWB 261516 drill bit is an SDS Plus shank accessory designed for rotary hammers with a 16 mm diameter. It is intended for drilling holes for wall plugs and anchor fixings in materials such as reinforced concrete, aerated concrete, sandstone and natural stone. The CROSS-TIP 4-way cutting tip and multi-phase spiral geometry provide efficient material removal, low vibration and smooth running for consistent drilling performance.

Advantages

The high-temperature brazed CROSS-TIP 4-way cutting tip reduces snagging and improves centring when starting holes. The multi-phase spiral ensures optimal waste removal and maintains drilling efficiency over time. SDS Plus shank offers quick, secure mounting in rotary hammers, while the 16 mm diameter is suitable for common anchor and wall-plug sizes.

Suitable for

Key specifications

How to use

Install the drill bit into an SDS Plus rotary hammer according to the tool manufacturer's instructions. Mark the drilling location, start at low speed to ensure correct position, then apply steady pressure and operate at the recommended hammer and rotation settings for concrete. Withdraw the bit periodically to clear debris and maintain cooling. Use appropriate personal protective equipment and secure the workpiece as required.

Recommendations

For best results when drilling reinforced concrete, use a rotary hammer with SDS Plus chuck and select hammering settings appropriate for the material. Keep the bit clean of debris and avoid excessive side load to extend service life. Match the 16 mm diameter to compatible wall plugs and anchors.