Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Bosch AIZ 20 AB BIM cutter

Bosch AIZ 20 AB BIM cutter
Bosch AIZ 20 AB BIM cutter
Bosch AIZ 20 AB BIM cutter
Bosch AIZ 20 AB BIM cutter
158,31 kr.
PDF
PDF
Lagerstatus 5 Produktkode 1464655 Model 2 609 256 950 Garanti 2 år

Levering & returnering

Forventet levering fredag den 11. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The Bosch AIZ 20 AB BIM Cutter is a bimetal plunge-cut blade designed for cutting metal, plasterboard and wood with a working depth of 30 mm. Made from durable BiMetal material to extend lifetime, the blade is supplied as a single piece in blister packaging for easy storage and handling. It is suitable for a variety of repair and renovation tasks where precise flush and recessed cuts are required.

Advantages

The BiMetal construction provides enhanced durability and resistance to wear when cutting mixed materials. The 30 mm working depth allows controlled plunge cuts and recesses in furniture components and plasterboard. The blade design enables flush cutting of nails, copper pipes and thin metal while remaining effective on wood substrates.

Suitable for

  • Plunge cuts and recesses in plasterboard
  • Creating access recesses in furniture for sockets and fittings
  • Flush cutting nails and copper pipes
  • Cutting thin metal and wood in renovation tasks

Key specifications

  • Brand: Bosch
  • Model / MPN: 2609256950
  • EAN: 3165140523349
  • Material: BiMetal
  • Working depth: 30 mm
  • Pack contents: 1 piece, blister
  • Category: Miscellaneous repair tools

How to use

Install the AIZ 20 AB BIM blade in a compatible oscillating multi-tool according to the tool manufacturer’s instructions. Mark the cut line or position the blade for the required plunge. Start the tool at low speed to establish the cut, then increase speed as needed while maintaining steady pressure. For flush cuts, approach the workpiece carefully and control the blade to avoid damaging the surrounding material. Observe safety precautions and wear appropriate protective equipment.

Recommendations

Use the blade for occasional to moderate cutting tasks on mixed materials; avoid excessive side pressure to prolong blade life. Replace the blade when cutting performance decreases or teeth show significant wear.
Vigtigste egenskaber
  • Plunge cuts and recesses in plasterboard
  • Creating access recesses in furniture for sockets and fittings
  • Flush cutting nails and copper pipes
  • Cutting thin metal and wood in renovation tasks
  • Brand: Bosch
  • Model / MPN: 2609256950
  • EAN: 3165140523349
  • Material: BiMetal
  • Working depth: 30 mm
  • Pack contents: 1 piece, blister
  • Category: Miscellaneous repair tools

Specifikationer

Specifikationer
Arbejdsdybde
3 cm
Egnet til materialer
Metal, gipsplade, træ
Emballagetype
Blisterpakning
Materiale
Bimetal
Mængde pr. pakke
1 pc(s)
Produkttype
Multifunktionsværktøjshåndtag
Type
Skærer

Brochure

Åbn Brochure
Prishistorik for de seneste 6 måneder
Bosch AIZ 20 AB BIM cutter
Aktuel
158,31 kr.
Laveste 7 d.
158,31 kr.
Højeste 7 d.
158,33 kr.
Ændring 24 timer
-0,01 kr.   0%
Ændring 7 d.
-0,02 kr.   0%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BOSCH-produkter i denne kategori

12
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier