Dykpumpe Gardena 8600 BASIC

The Gardena 8600 BASIC submersible pump is designed for reliable and efficient water removal in domestic and light professional applications. With a pumping capacity of 8600 l/h and a maximum immersion depth of 6 m, the unit handles rapid drainage tasks while operating from very low water levels down to 4 mm. The compact 3.7 kg housing and 400 W motor combine mobility with sufficient power for transferring, draining and recirculating water in cellars, basements, ponds and construction sites.

Advantages

The Gardena 8600 BASIC offers a high flow rate for fast water removal and a low minimum water level for near-complete drainage. Its 400 W motor ensures steady performance, while the lightweight design supports easy handling and transport. Built for continuous operation in submerged conditions, the pump features straightforward connection options and robust materials appropriate for handling clear and slightly dirty water.

Suitable for

• Draining flooded cellars and basements
• Emptying garden ponds and water features
• Temporary dewatering on building sites
• Water transfer for irrigation or rainwater reuse

Key specifications

• Pumping capacity: 8600 litres per hour
• Motor power: 400 W
• Maximum immersion depth: 6 metres
• Minimum operating water level: 4 millimetres
• Weight: approximately 3.7 kilograms
• Suitable fluid: clear and slightly dirty water
• Housing colours: black and blue

How to use

Place the submerged pump on a stable, level surface in the water to be removed, ensuring it is fully supported and not resting on soft mud that could block the inlet. Connect an appropriate discharge hose or pipe to the outlet and secure the connection. Plug the pump into a properly grounded power supply and switch it on; monitor operation to confirm consistent flow. When water level falls to the minimum working depth, switch off the pump and remove it from the water. After use, rinse the pump housing with clean water and store it in a dry place.

Recommendations

Use the pump with a discharge hose of suitable diameter to minimise pressure loss and avoid running the unit dry. For long-term reliability, inspect the intake area periodically for debris and follow local electrical safety guidelines when operating electrical equipment near water.