Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

eSUN PLA-BASIC 1,75 mm orange 1 kg genopfyldningsfilament

eSUN PLA-BASIC 1,75 mm orange 1 kg genopfyldningsfilament
eSUN PLA-BASIC 1,75 mm orange 1 kg genopfyldningsfilament
273,16 kr.
PDF
PDF
Lagerstatus 4 Produktkode 3365066 Model PLA-BASIC175O1R1 Garanti 2 år

Levering & returnering

Forventet levering tirsdag den 8. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Beskrivelse

For makers who demand reliability on long, intricate prints, this orange PLA-BASIC refill keeps your spool holder stocked without the waste of a new reel. The vivid orange shade is ideal for functional prototypes, mechanical parts, and eye-catching display models where strength and a clean finish matter.

Key specifications

  • Material: PLA+ (Polylactic Acid Plus)
  • Diameter: 1.75 mm (±0.03 mm tolerance)
  • Net weight: 1 kg refill (no spool)
  • Print temperature: 205–225 °C
  • Bed temperature: 45–60 °C (or unheated)
  • Print speed: 40–100 mm/s
  • Tensile strength: 50–70 MPa
  • Elongation at break: 30%
  • Heat deflection temperature: 52 °C (0.45 MPa)
  • Density: 1.24 g/cm³
  • Melt flow index: 2–5 g/10 min (190 °C/2.16 kg)
  • Vacuum-sealed with desiccant

Why choose it

PLA-BASIC from eSUN delivers the easy printing you expect from PLA with improved toughness and layer adhesion. The tight diameter tolerance ensures consistent extrusion, reducing clogs and under-extrusion. As a refill, it cuts down on plastic spool waste and lowers cost per gram. The bright orange colour is consistent batch-to-batch, so multi-part prints match perfectly.

Ideal use cases

  • Functional prototypes that need a bit more impact resistance than standard PLA
  • Mechanical parts, brackets, and enclosures
  • Educational projects and STEM kits
  • Artistic models and display pieces where colour pop is essential
  • Print farms looking to reduce spool waste and storage space

Good to know

This is a refill: wind it onto a reusable spool before printing. Store in a dry box after opening; while it ships vacuum-sealed with desiccant, PLA can absorb moisture over time. For best results, use a hardened nozzle if you print frequently—PLA+ is slightly more abrasive than standard PLA. No heated bed is required, but a bed temperature of 45–60 °C improves adhesion on large flat parts.

Specifikationer

Specifikationer
Antal pr. pakke
1
Bruttobredde (mm)
200
Bruttodybde (mm)
200
Bruttohøjde (mm)
64
Bruttovægt
1.29 kg
EAN
6922572211544
Kategori
Filament til 3D-printer
Materiale
PLA+
Model
PLA-BASIC175O1R1
MPN
PLA-BASIC175O1R1
Mærke
eSUN
Nettovægt
1 kg
Producent
eSUN
Produktfarve
Orange
Produkttype
Filament til 3D-printer
Trykfarver
Orange
Type
Filament
Vægt
1.29 kg
Prishistorik for de seneste 6 måneder
eSUN PLA-BASIC 1,75 mm orange 1 kg genopfyldningsfilament
Aktuel
273,16 kr.
Laveste 7 d.
269,92 kr.
Højeste 7 d.
273,16 kr.
Ændring 24 timer
0,00 kr.   0%
Ændring 7 d.
+3,24 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere ESUN-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier