Fiber-transceivermodul BlueOptics 3880-BO 10000 Mbit/s SFP+

The BlueOptics 3880-BO 10000 Mbit/s SFP+ fiber optic transceiver module is designed for high-speed network links and short- to medium-reach optical connections. This SFP+ module supports a maximum data transfer rate of 10 Gbit/s and is housed in a compact silver metal enclosure that weighs approximately 20 g. Compliance with CE, FCC and RoHS standards ensures it meets common regulatory and environmental requirements, while an MTBF of 1,000,000 hours indicates suitability for continuous operation in managed network environments.

Advantages

This SFP+ transceiver provides a 10 Gbit/s interface in a small-form pluggable design compatible with standard SFP+ slots. The metal housing offers mechanical robustness and thermal dissipation, and the light weight simplifies handling and installation. Regulatory compliance and a high MTBF deliver predictable reliability and reduced replacement frequency for data center, campus and enterprise network equipment.

Suitable for

• 10 Gigabit Ethernet uplinks between switches and routers
• High-speed server connections in data centers
• Fiber backbone and aggregation links
• Carrier and service-provider optical links with SFP+ ports

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10,000 Mbit/s (10 Gbit/s)
• Form factor: SFP+ small form-factor pluggable
• Housing material and color: metal, silver
• Weight: approximately 0.02 kg
• Reliability: MTBF 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Insert the BlueOptics 3880-BO module into a compatible SFP+ port on your switch, router or network interface card until it seats and the retention latch engages. Connect the appropriate single-mode or multimode fiber patch cable to the transceiver's optical interface following the port polarity. Verify link status and negotiate speed settings on the network device; the module operates at 10 Gbit/s when both ends support SFP+ 10G links. For hot-pluggable operation, follow the host device manufacturer's instructions to avoid link disruption.

Recommendations

Install and remove the transceiver in a static-safe environment, avoid touching optical interfaces, and keep dust caps on unused ports. Use compatible fiber cabling and verify transceiver support in the host device's hardware and firmware to ensure interoperability and stable 10 Gbit/s operation.