Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m

Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
60 md.
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
1.850,82 kr.
PDF
PDF
Lagerstatus 50 Produktkode 1464999 Model 3AL82019AA-BO Garanti 5 år

Levering & returnering

Forventet levering mandag den 7. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics 3AL82019AA-BO SFP+ 80000 m is a fiber optic transceiver module designed for high-speed single-mode fiber links up to 80,000 metres. It uses an SFP+ interface with an LC duplex connector and supports 10 Gbit/s optical transmission over long distances. The module has an aluminium housing and a lightweight construction of approximately 20 g, intended for use in compatible networking hardware that accepts MSA-compliant SFP+ transceivers.

Advantages

This transceiver offers long-reach optical connectivity up to 80 km with simultaneous transmit and receive channels via LC duplex. Its SFP+ form factor ensures wide compatibility with switches, routers, storage systems and other networking devices that follow MSA standards. The aluminium housing provides a compact, durable solution while the lightweight design simplifies handling and installation. Digital diagnostic monitoring (DDM/DOM) compatibility is available to support remote monitoring of operating parameters when supported by the host hardware.

Suitable for

  • Long-distance 10 Gbit/s Ethernet links over single-mode fiber
  • Interconnection of data center switches and routers across campus or metropolitan distances
  • Storage area network uplinks and high-speed backup links
  • WAN and carrier-grade fiber connections requiring LC duplex interfaces

Key specifications

  • Interface type: SFP+
  • Maximum nominal reach: up to 80,000 m (80 km) over single-mode fiber
  • Data rate: 10 Gbit/s
  • Connector: LC duplex
  • Wavelength (tx/rx): 1550 nm (typical for long-reach 10GBASE-ZR optics)
  • Housing material and colour: aluminium / aluminium-colour
  • Weight: approx. 0.02 kg
  • Monitoring: Digital Diagnostics Monitoring (DDM/DOM) support when enabled by host

How to use

Insert the BlueOptics SFP+ transceiver into an SFP+ slot of compatible networking equipment until it latches securely. Connect an appropriate single-mode LC duplex patch cable between transceivers or to a patch panel, observing correct transmit/receive polarity. Ensure the host device supports long-reach 10G optics and DDM/DOM if diagnostic monitoring is required. Follow the equipment vendor’s guidelines for enabling SFP+ modules and verify link status via the host management interface.

Recommendations

Use single-mode fiber cabling and LC duplex connectors rated for long-reach 10G transmission; verify compatibility with the network device vendor and test links after installation. For reliable diagnostics, confirm that the host supports DDM/DOM and monitor reported parameters such as laser output, receive power and temperature.

Vigtigste egenskaber
  • Long-distance 10 Gbit/s Ethernet links over single-mode fiber
  • Interconnection of data center switches and routers across campus or metropolitan distances
  • Storage area network uplinks and high-speed backup links
  • WAN and carrier-grade fiber connections requiring LC duplex interfaces
  • Interface type: SFP+
  • Maximum nominal reach: up to 80,000 m (80 km) over single-mode fiber
  • Data rate: 10 Gbit/s
  • Connector: LC duplex
  • Wavelength (tx/rx): 1550 nm (typical for long-reach 10GBASE-ZR optics)
  • Housing material and colour: aluminium / aluminium-colour
  • Weight: approx. 0.02 kg
  • Monitoring: Digital Diagnostics Monitoring (DDM/DOM) support when enabled by host

Specifikationer

Specifikationer
Driftstemperatur (T-T)
0 - 70
Ethernet LAN
Ja
Ethernet-interfacetype
10 Gigabit Ethernet
Fiber-Ethernet-kabelteknologi
10GBASE
Interfacetype
SFP+
Maks. overførselsafstand
80000 m
Mængde pr. pakke
1 pc(s)
Pakkens vægt
30 g
Produktfarve
Aluminium
Rx-bølgelængde (maks.)
1550 nm
SFP-transceivertype
Fiberoptisk
Tx-bølgelængde (maks.)
1550 nm
Vægt
0.02 kg
Prishistorik for de seneste 6 måneder
Fiber-transceivermodul BlueOptics 3AL82019AA-BO SFP+ 80000 m
Aktuel
1.850,82 kr.
Laveste 7 d.
1.830,98 kr.
Højeste 7 d.
1.850,82 kr.
Ændring 24 timer
0,00 kr.   0%
Ændring 7 d.
+19,55 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier