Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+

Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
60 md.
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
406,24 kr.
PDF
PDF
Lagerstatus 2045 Produktkode 1476602 Model OWTRD1-BO Garanti 5 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics OWTRD1-BO 10000 Mbit/s SFP+ is a fiber optic transceiver module designed for 10GBASE-SR multimode connections. It uses an LC Duplex interface and operates with 850 nm transmit and receive wavelengths. The module is compliant with CE, RoHS and FCC standards, has a compact SFP+ form factor, and weighs approximately 20 g, making it suitable for installation in switches, routers and other networking hardware that accept MSA-compliant SFP+ modules.

Advantages

The module supports a 10 Gbit/s data rate over multimode fiber with simultaneous transmit and receive channels via LC Duplex. It is built to MSA standards and is tested for compatibility with common hardware platforms. High-quality components are used for optical and electronic parts, and the transceiver includes Digital Diagnostics Monitoring (DDM) support compatible with SFF-8472 for real-time reporting of voltage, current, optical power and temperature when the host device supports DDM. Its compact SFP+ form factor and silver color simplify integration into standard rack equipment.

Suitable for

Key specifications

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on your switch, router or server until it clicks into place. Connect LC Duplex multimode fiber patch cables to the TX and RX ports, ensuring correct polarity. Power up the host device and verify link status via the device’s management interface. If DDM/DOM is required, enable and monitor the diagnostic parameters from the host system provided it supports SFF-8472 diagnostics. For hot-pluggable operation, follow the host vendor’s instructions when inserting or removing the module to avoid port or module damage.

Recommendations

Use OM3/OM4 multimode fiber for optimal 10GBASE-SR performance and keep connectors clean to maintain low insertion loss. Verify host compatibility and, where available, enable DDM in the network equipment to monitor optical link health. Store and handle the transceiver in a static-safe environment and avoid exposing it to extreme temperatures or mechanical shock.

Vigtigste egenskaber
  • 10 Gbit/s server-to-switch and switch-to-switch uplinks over multimode fiber
  • Storage area networks (SAN) and data center interconnects with short-range multimode links
  • High-speed networking in enterprise and campus environments
  • Replacement or expansion of MSA-compliant SFP+ ports in network equipment
  • Interface type: SFP+ (LC Duplex)
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Optical wavelength: 850 nm (transmit and receive)
  • Fiber type: multimode fiber (optimized for short-range 10GBASE-SR)
  • Form factor: SFP+ MSA-compliant module
  • Compliance: CE, RoHS, FCC
  • Weight: approximately 0.02 kg

Specifikationer

Specifikationer
Driftstemperatur (T-T)
0 - 70
Fiber-Ethernet-kabelteknologi
10GBASE
Fiberoptisk stik
LC
Formfaktor
SFP+
Interfacetype
SFP+
Maks. driftstemperatur
70 °C
Maksimal dataoverførselshastighed
10000 Mbit/s
Min. driftstemperatur
0 °C
Multimode-fiber (MMF) understøttet
Ja
Overensstemmelsescertifikater
Federal Communications Commission (FCC), RoHS, CE
Overholdelse af bæredygtighedskrav
Ja
Pakkens vægt
30 g
Produktfarve
Sølv
Rx-bølgelængde (maks.)
850 nm
SFP-transceivertype
Fiberoptisk
Tx-bølgelængde (maks.)
850 nm
Vægt
0.02 kg

Brochure

Åbn Brochure

Dokument

Åbn Dokument
Prishistorik for de seneste 6 måneder
Fiber-transceivermodul BlueOptics OWTRD1-BO 10000 Mbit/s SFP+
Aktuel
406,24 kr.
Laveste 7 d.
400,29 kr.
Højeste 7 d.
406,26 kr.
Ændring 24 timer
-0,02 kr.   0%
Ændring 7 d.
+5,95 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier