Fiber-transceivermodul BlueOptics SFPP-SR-AX-BO SFP+ 300m

The BlueOptics SFPP-SR-AX-BO SFP+ 300m is a fiber optic transceiver module designed for 10G multimode applications with a maximum reach of 300 meters. Housed in an aluminium shell and weighing approximately 20 grams, this SFP+ module uses an LC duplex connector and operates at 850 nm for both transmitter and receiver, complying with MSA form-factor and 10GBASE-SR optical signalling. It supports typical high-speed protocols over multimode fiber and includes digital diagnostic monitoring (DDM/DOM) capability when the host hardware provides support.

Advantages

The module delivers 10 Gigabit connectivity in a compact SFP+ housing that is mechanically compatible with equipment that accepts MSA-compliant transceivers. Its aluminium construction provides a durable, lightweight solution for dense network deployments. Built and tested for interoperability, the module supports digital diagnostics for real-time monitoring of key optical parameters when the connected device enables DDM/DOM.

Suitable for

Key specifications

How to use

Install the SFPP-SR-AX-BO into an SFP+ slot of a compatible switch, router or storage device following the vendor’s hot-plug procedure. Connect LC duplex multimode fiber patch cords between transceivers or to a patch panel, ensuring transmit and receive channels are correctly routed. Verify that the host device recognizes the transceiver and, if required, enable or confirm DDM/DOM support in the management interface to access real-time diagnostic parameters. Observe standard electrostatic discharge (ESD) precautions and keep dust caps on the connector when the module is not in use.

Recommendations

For optimal performance, use high-quality multimode fiber and LC duplex patch cords rated for 10GBASE-SR. Confirm compatibility with the target hardware platform and test the link after installation. If remote monitoring is needed, ensure the host system supports DDM/DOM to read voltage, temperature, laser bias and optical power values.