Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP

Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
60 md.
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
762,33 kr.
PDF
PDF
Lagerstatus 90 Produktkode 1486416 Model X2124A-N-BO Garanti 5 år

Levering & returnering

Forventet levering mandag den 7. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics X2124A-N-BO QSFP MPO MTP is a fiber optic transceiver module designed for 40G high-speed data transmission over multimode fiber. The module uses a QSFP interface with an MPO/MTP connector and an 850 nm transmitter and receiver pair, following MSA standards for physical compatibility. Housed in a lightweight aluminium enclosure and weighing approximately 20 g, the module is supplied as a single unit and is intended for integration into network equipment that accepts QSFP 40GBASE-SR4 transceivers.

Advantages

The module provides standardized QSFP connectivity and an MPO/MTP multi-fiber interface that supports simultaneous transmit and receive channels. Compliance with MSA specifications ensures physical and electrical compatibility with equipment that supports 40GBASE-SR4 QSFP transceivers. The aluminium housing offers a compact and lightweight form factor suitable for dense deployments, while the multimode 850 nm optics support short-reach high-bandwidth links.

Suitable for

Key specifications

How to use

Install the transceiver into a compatible QSFP slot on the host device following the device manufacturer’s insertion procedure. Connect an MPO/MTP multimode fiber patch cord to the module’s MPO/MTP port and ensure correct fiber polarity and mapping for SR4 operation. Verify link status through the host device and, if available, use the host management interface to check diagnostic information. Remove the transceiver by powering down or following hot-swap guidance from the host device, then disconnect the fiber patch cord and store protective dust caps when not in use.

Recommendations

Use high-quality multimode MPO/MTP patch cords and maintain clean connectors to ensure reliable optical performance. Confirm the host device firmware supports third-party QSFP 40GBASE-SR4 modules and enable DDM/DOM monitoring if supported by the platform for real-time diagnostics. Follow ESD precautions when handling the module and avoid excessive bending of multimode fiber to preserve link quality.

Vigtigste egenskaber
  • 40G Ethernet uplinks and server interconnects in data centers
  • High-speed switching and routing platforms that accept QSFP 40GBASE-SR4 modules
  • Short-reach multimode fiber links up to the supported distance for 850 nm SR4 optics
  • Interface type: QSFP
  • Connector type: MPO/MTP multi-fiber connector
  • Optical wavelength: 850 nm (transmit and receive)
  • Application: 40GBASE-SR4 multimode fiber transmission
  • Product colour: Aluminium
  • Weight: 0.02 kg

Specifikationer

Specifikationer
Driftstemperatur (T-T)
0 - 70
Ethernet LAN
Ja
Ethernet-interfacetype
40 Gigabit Ethernet
Fiber-Ethernet-kabelteknologi
40GBASE
Fiberoptisk stik
MPO, MTP
Interfacetype
QSFP
Maks. overførselsafstand
150 m
Mængde pr. pakke
1 pc(s)
Pakkens vægt
30 g
Produktfarve
Aluminium
Rx-bølgelængde (maks.)
850 nm
SFP-transceivertype
Fiberoptisk
Tx-bølgelængde (maks.)
850 nm
Vægt
0.02 kg
Prishistorik for de seneste 6 måneder
Fiber-transceivermodul BlueOptics X2124A-N-BO QSFP MPO MTP
Aktuel
762,33 kr.
Laveste 7 d.
754,81 kr.
Højeste 7 d.
762,33 kr.
Ændring 24 timer
+0,04 kr.   +0%
Ændring 7 d.
+7,40 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier