Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO

Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
60 md.
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
754,89 kr.
PDF
PDF
Lagerstatus 90 Produktkode 1477201 Model Q7F11A-BO Garanti 5 år

Levering & returnering

Forventet levering onsdag den 2. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics Q7F11A-BO QSFP MTP/MPO fiber optic transceiver module is a 40GBASE-SR4 compatible solution designed for high-speed multimode fiber links. Constructed with an aluminium housing and a compact form factor (approx. 20 g), the module provides 40 Gbit/s aggregate throughput using an MPO/MTP connector and supports transmission distances typical for 850 nm multimode links. The transceiver follows MSA-defined QSFP form-factor conventions and is intended for use in network switches, routers, storage systems and other hardware accepting QSFP 40G optics.

Advantages

This BlueOptics QSFP module provides a standardized MPO/MTP interface for multi-fiber connectivity and is compatible with systems that accept 40GBASE-SR4 QSFP optics. The aluminium housing offers mechanical protection while keeping the unit lightweight for easy handling and installation. The design supports simultaneous transmit and receive channels across the MPO/MTP connector and includes digital diagnostic monitoring (DDM/DOM) functionality when supported by host hardware, enabling real-time monitoring of optical power, bias current, module temperature and supply voltage.

Suitable for

Key specifications

How to use

Install the QSFP transceiver into a compatible QSFP port on the target switch, router or storage device following the vendor’s hot-plug instructions. Connect an MPO/MTP multimode fiber patch cord or trunk to the module’s MPO/MTP connector, ensuring correct polarity and fiber type (OM3/OM4 recommended for 40GBASE-SR4 links). Configure the host interface according to the equipment vendor’s guidelines to enable 40G operation and, if required, enable DDM/DOM monitoring in the management software to read real-time diagnostic values.

Recommendations

Verify host compatibility with 40GBASE-SR4 QSFP optics and use certified MPO/MTP patch cords and structured cabling to ensure reliable performance. Maintain clean connector end-faces, follow manufacturer ESD precautions during handling and confirm that the receiving equipment supports DDM/DOM to access diagnostic data. For optimal reach and performance, use appropriate multimode fiber (OM3/OM4) and avoid bends or stress on fiber runs.

Vigtigste egenskaber
  • Data center aggregation and spine-leaf 40 Gbit/s links
  • Short-reach multimode fiber connections up to typical 150 m on OM3/OM4
  • Interconnects between switches, routers and storage arrays
  • Environments requiring MPO/MTP trunking and breakout cabling
  • Form factor: QSFP (Quad Small Form-factor Pluggable)
  • Connection: MPO/MTP multi-fiber connector
  • Data rate: up to 40 Gbit/s aggregate (4 × 10G lanes)
  • Wavelength: 850 nm multimode operation
  • Housing material: aluminium, lightweight design (~20 g)
  • Typical reach: multimode short-reach distances (industry SR4 class)
  • Monitoring: Digital Diagnostics Monitoring (DDM/DOM) support when enabled by host

Specifikationer

Specifikationer
Antal medfølgende produkter
1 pc(s)
Driftstemperatur (T-T)
0 - 70
Fiberoptisk stik
MTP/MPO
Garantiperiode
5 år
Interfacetype
QSFP
Maks. overførselsafstand
150 m
Pakkens vægt
30 g
Produktfarve
Aluminium
Rx-bølgelængde (maks.)
850 nm
SFP-transceivertype
Fiberoptisk
Tx-bølgelængde (maks.)
850 nm
Vægt
0.02 kg
Prishistorik for de seneste 6 måneder
Fiberoptisk transceivermodul BlueOptics Q7F11A-BO QSFP MTP/MPO
Aktuel
754,89 kr.
Laveste 7 d.
747,40 kr.
Højeste 7 d.
754,93 kr.
Ændring 24 timer
-0,04 kr.   0%
Ændring 7 d.
+7,49 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier