Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m

Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
60 md.
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
518,36 kr.
PDF
PDF
Lagerstatus 2143 Produktkode 1476490 Model OC10-LR-OPT-1-BO Garanti 5 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m is a 10GBASE-LR fiber optic transceiver module designed for long-distance single-mode fiber links up to 10,000 meters. The module comes in an aluminum housing, weighs approximately 20 g and uses an LC duplex connector following MSA standards. It supports 10 Gbit/s optical transmission with separate 1310 nm transmitter and receiver channels and is compatible with systems that accept standard SFP+ 10GBASE-LR optics.

Advantages

This SFP+ transceiver provides long-reach 10 Gbit/s optical connectivity over single-mode fiber while maintaining a compact, lightweight aluminum enclosure that supports rack and chassis installations. Compliance with MSA form-factor and LC duplex connector standards ensures broad interoperability with switches, routers and storage devices that accept SFP+ 10GBASE-LR modules. The module is designed for stable optical performance and includes support for standard diagnostic monitoring interfaces where supported by host hardware.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP+ module into any compatible SFP+ slot on supported switches, routers or host adapters following the equipment manufacturer’s hot-plug procedures. Use LC duplex single-mode patch cords to connect to the remote transceiver or patch panel, ensuring correct TX-to-RX polarity. Verify link status and speed on the host device; enable or confirm support for 10GBASE-LR if required by the platform. If the host hardware supports digital diagnostics (DDM/DOM), enable monitoring to read optical parameters via the management interface.

Recommendations

For optimal performance, use single-mode LC duplex fiber and quality patch cords, protect connectors from contamination, and ensure the host device supports SFP+ 10GBASE-LR modules and any diagnostic features you plan to use. Follow vendor guidelines for cable routing and bend radius to maintain link integrity.

Vigtigste egenskaber
  • Long-distance 10 Gbit/s Ethernet links over single-mode fiber
  • Interconnects between switches, routers and data center equipment
  • Storage area network (SAN) and Fibre Channel over Ethernet (FCoE) applications supporting 10G
  • Form factor: SFP+
  • Data rate: 10 Gbit/s
  • Transmission mode: Single-mode fiber
  • Wavelength: 1310 nm (TX and RX)
  • Maximum reach: up to 10,000 m
  • Connector: LC duplex
  • Housing material: aluminium
  • Weight: approx. 0.02 kg

Specifikationer

Specifikationer
Driftstemperatur (T-T)
0 - 70
Ethernet LAN
Ja
Ethernet-interfacetype
10 Gigabit Ethernet
Fiber-Ethernet-kabelteknologi
10GBASE
Interfacetype
SFP+
Maks. overførselsafstand
10000 m
Mængde pr. pakke
1 pc(s)
Pakkens vægt
30 g
Produktfarve
Aluminium
Rx-bølgelængde (maks.)
1310 nm
SFP-transceivertype
Fiberoptisk
Tx-bølgelængde (maks.)
1310 nm
Vægt
0.02 kg
Prishistorik for de seneste 6 måneder
Fibertransceivermodul BlueOptics OC10-LR-OPT-1-BO SFP+ 10000 m
Aktuel
518,36 kr.
Laveste 7 d.
510,51 kr.
Højeste 7 d.
518,39 kr.
Ændring 24 timer
-0,03 kr.   0%
Ændring 7 d.
+7,85 kr.   +2%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier