Gedore 6089550 kombinationsnøgle

The Gedore 6089550 combination wrench is made from Gedore vanadium steel (31CrV3) and chrome-plated for corrosion resistance. It conforms to DIN 3113 Form A, ISO 3318 and ISO 7738 standards where applicable, with the ring angled 15° offset from the shaft and the shaft produced in a girder pattern. Sizes 3 to 5.5 are supplied with a hexagon ring; sizes from 6 onward use a UD profile. Non-standard variants are indicated with an asterisk in the specification data.

Advantages

Manufactured from 31CrV3 vanadium steel for high strength and wear resistance, and chrome-plated to reduce corrosion. The 15° offset ring improves access in confined spaces, while the girder-pattern shaft reduces weight without compromising stiffness. Available ring and profile types by size ensure correct fit for different fasteners.

Suitable for

Key specifications

How to use

Select the correct size combination wrench for the fastener. Place the open end or ring over the nut or bolt head and apply steady force, ensuring the ring’s 15° offset is oriented to provide clearance when working near adjacent components. Use as a single-hand turning tool or in combination with other tools as required. Avoid applying impact forces or using the wrench as a hammer; do not exceed the intended torque for the selected size.

Recommendations

Keep the chrome-plated surface clean and dry to limit corrosion. Inspect the tool for wear or deformation before use and replace if the ring or jaws are rounded. For best performance, store in a tool organizer to prevent damage and to maintain size identification.