gira S3000 Bevægelsessensor 2,20 m til System 55 hvid (model 537503)

gira S3000 motion sensor 2.20 m for System 55 white (model 537503) is a compact presence detector designed for integration into System 55 frames and switch programs. With a detection range of 2.20 m, it detects movement reliably to control lighting automatically. The device is intended for indoor use in corridors, stairways and rooms where hands-free lighting and energy-efficient control are required. The white finish matches standard System 55 aesthetic and mounting dimensions allow straightforward replacement or new installation within compatible switch frames.

Advantages

The S3000 motion sensor provides automatic lighting control that reduces unnecessary energy consumption and increases convenience through contactless operation. Its System 55 compatibility ensures seamless integration with existing switch programs and frames, simplifying installation and replacement. The defined 2.20 m detection range allows targeted presence sensing for small to medium-sized zones, delivering precise activation without wide-area false triggers.

Suitable for

Key specifications

How to use

Install the motion sensor into a compatible System 55 frame according to mounting instructions and local electrical regulations. Place the sensor at a position and orientation that covers the intended detection zone—typically facing the walking path or entrance. After wiring and mounting, verify operation by walking through the detection area to confirm reliable activation and adjust sensor alignment if necessary. Configure any available sensitivity or delay settings via the device controls or wiring configuration as required for the specific location.

Recommendations

Position the sensor to avoid direct exposure to heat sources or reflective surfaces that may cause false triggers. For corridors and stairwells, mount the sensor at a height and angle that covers the path centrally. When replacing an existing insert, ensure power is isolated before removal and confirm compatibility with the existing System 55 frame and wiring. Use the device in dry indoor environments and follow local electrical safety standards during installation.