Skærmbeskyttelse Glastify UVTG+ til Samsung Galaxy S23 Ultra, klar [2-pak]

The tempered glass GlasTIFY UVTG+ is made of lightweight, milled AGC glass with a thickness of just 0.28mm.

During the production process, it was subjected to tempering at 420°C, which gives it a surface hardness of 9H, ensuring the highest level of protection during daily use and absorbing impact force.

UVTG+ is bonded using a liquid substance over the entire surface of the screen and then cured with a UV lamp. This combination achieves an ideal effect of smoothness, clarity, and responsiveness on the curved screen.

The glass is precisely made and fully functional. Remember, you receive 2 pieces of glass in the set.

The GlasTIFY brand of glass does not need further introduction, as it is absolutely "TOP" in the category of screen protection.

The glass is compatible with most cases available on the market, the die-cut is "Case Friendly".

Remember to remove and re-add your fingerprints after installing the glass - if applicable.

INSTALLATION INSTRUCTIONS

1) Start the installation in the bathroom just after taking a shower - the steam will absorb all the dust in the air and it won’t interfere with your installation.

2) Level your phone so that it lies flat; otherwise, the adhesive will flow off the phone and the installation will fail.

• Remember to cover the top speaker with a sticker from the set.

3) Use an alcohol-soaked wipe to thoroughly clean the surface, then polish it with a dry cloth.

• 4) Remove dust using the sticker.

5) Unscrew the main cap (the adhesive will not flow) and place the tube in the center of the screen, then gently unscrew the top cap (the adhesive will start to flow).

6) Remove the protective layer and place the glass on the display; if you place the glass crookedly, you can freely adjust it while the glass is floating on the screen.

Wait a few seconds for the adhesive to fill the entire surface of the glass.

• 7) Using the UV lamp, cure the glass in each zone for 10 seconds.
• 8) Clean the phone of adhesive residue and re-add your fingerprints.

PRODUCT FEATURES

• 100% Original
• Packaged in original packaging
• Hardness 9H
• Customized for curved screens
• 2.5D milled edges that feel nice to the touch
• Hydrophobic layer
• Oleophobic layer
• Perfectly clear
• Does not affect touch sensitivity
• Dimensions: 160x75mm

THE SET INCLUDES

• 2 x GlasTIFY UVTG+ Glass
• 1 x Installation kit
• Weight (kg): 0.08