HDMI-kabel DeLOCK 85148 0,5 m Type A til Type D hvid

The DELOCK HDMI Cable 85148 (0.5 m) with HDMI Type A to Type D connectors provides a compact connection between devices such as cameras or tablets with Micro HDMI and monitors or TVs with a standard HDMI-A port. The white, slim cable features short connectors, gold-plated contacts and triple shielding to ensure reliable transmission of audio, video and Ethernet signals with a data rate up to 18 Gbit/s and support for resolutions up to 3840 x 2160 at 60 Hz.

Advantages

The cable combines a slim, low-profile design with short connectors for tight spaces, gold-plated contacts for improved contact quality and triple shielding for reduced interference. It supports 4K at 60 Hz, 4K 3D at up to 24 Hz, 21:9 cinema aspect ratio, ARC (Audio Return Channel), simultaneous transmission of two video channels and up to four audio channels, plus Ethernet over HDMI.

Suitable for

• Connecting Micro HDMI-equipped cameras or tablets to TVs and monitors
• Transmitting 4K video (3840 x 2160 @ 60 Hz) and 4K 3D content
• Situations requiring compact cables with short connectors for tight ports
• Setups needing ARC or Ethernet-over-HDMI functionality

Key specifications

• Length: 0.5 m
• Connector 1: HDMI Type A (Standard)
• Connector 2: HDMI Type D (Micro)
• Maximum bandwidth: 18 Gbit/s
• Maximum resolution: 3840 x 2160 @ 60 Hz
• Audio sampling rate: up to 1536 kHz
• Features: Gold-plated contacts, triple shielded, ARC, Ethernet over HDMI
• Colour: White

How to use

Connect the Micro HDMI (Type D) plug to the camera, tablet or other device with a Micro HDMI port and insert the HDMI Type A plug into the monitor or TV HDMI-A port. Ensure both devices are powered on and set the TV or monitor to the correct HDMI input. Configure output resolution and audio settings on the source device if necessary to match the display capabilities.

Recommendations

For optimal signal quality, keep the cable length short and avoid tight bends near the connectors. Check device specifications for supported resolutions and enable ARC or Ethernet functions in device menus if required.