Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Hulsavsbeskyttelse Smart365 5–10 mm, HEX, 4-dele

Hulsavsbeskyttelse Smart365 5–10 mm, HEX, 4-dele
Hulsavsbeskyttelse Smart365 5–10 mm, HEX, 4-dele
222,11 kr.
PDF
PDF
Lagerstatus 50 Produktkode 1742894 Model 25-SET4HEX Garanti 2 år

Levering & returnering

Forventet levering torsdag den 3. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Beskrivelse

Smart365 hole saw set 5–10 mm, HEX, 4 pieces contains four diamond-edge hole saws with HEX shanks in sizes 5 mm, 6 mm, 8 mm and 10 mm. The set is intended for cutting precise small-diameter circular holes in materials compatible with diamond cutting edges. The HEX shank ensures a secure, torque-resistant connection with compatible drill chucks or holders and simplifies bit changes during plumbing, electrical installation and general DIY tasks.

Advantages

The diamond cutting rims provide accurate, clean holes with reduced chipping on brittle surfaces. The HEX shank design prevents slippage in the drill holder and transmits torque efficiently for controlled cutting. A compact 4-piece range covers common small-hole sizes used for pipes, cables and fasteners, reducing the need to stop and change tools. The set is lightweight and convenient to store, making it suitable for both on-site and home use.

Suitable for

Key specifications

How to use

Select the hole saw with the required diameter and insert the HEX shank into a compatible chuck or quick-change holder. Secure the shank firmly to avoid wobble. For brittle or fragile materials, start drilling at low speed and use light, steady pressure to allow the diamond edge to grind the material. Apply cooling or intermittent drilling if recommended for the material to avoid overheating. After cutting, withdraw the tool carefully and clear any debris from the cutting edge before storing.

Recommendations

Use appropriate personal protective equipment, such as safety glasses and gloves. Match the work speed and cooling method to the material being cut — for tile and glazed surfaces, use water cooling and low to moderate speeds; for other compatible materials follow manufacturer guidance. Do not use the diamond hole saws on materials not compatible with diamond abrasives to avoid tool damage.

Vigtigste egenskaber
  • Drilling small circular holes in ceramic tiles and glazed surfaces compatible with diamond abrasives
  • Creating access holes for pipes and cables in plumbing and electrical installations
  • Milling precise openings in countertop materials and fixtures where small diameters are required
  • General DIY tasks that require clean, accurate small-diameter holes in hard materials
  • Set contents: four hole saws, diameters 5 mm, 6 mm, 8 mm, 10 mm
  • Cutting edge: diamond grit for use on materials compatible with diamond abrasives
  • Shank type: HEX for anti-slip connection to compatible drill holders
  • Application: small-diameter circular holes in hard and brittle materials
  • Pieces in set: 4
Prishistorik for de seneste 6 måneder
Hulsavsbeskyttelse Smart365 5–10 mm, HEX, 4-dele
Aktuel
222,11 kr.
Laveste 7 d.
219,75 kr.
Højeste 7 d.
223,08 kr.
Ændring 24 timer
+0,12 kr.   +0%
Ændring 7 d.
+2,36 kr.   +1%
Ændring 30 d.
-1,78 kr.   -1%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Samme serie og alternativer

5

Populære produkter i denne kategori

2
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier