InLine netkabel 16A CEE 7/7 lige / IEC320/C19 3 m

Power cable with earth pin to IEC C19 for 16 A power supply

High performance up to 16 A:Supports the reliable operation of high-current devices such as servers and UPS systems
Safe power connection:Earth-connected plug with IEC C19 ensures a stable and standard-compliant power supply
Certified quality:VDE-certified for tested safety and reliable use in professional environments
Robust construction:Moulded plugs increase mechanical stability and reduce wear during operation
Flexible applications:Various lengths allow for installation tailored to requirements in different environments

This power cable with a safety plug and an IEC 60320 C19 equipment connector is designed for powering devices with high power consumption. It is suitable for use in demanding IT environments where a stable and safe power supply is required.
The CEE 7/7 safety plug establishes a reliable connection to the mains supply. On the device side, the IEC C19 plug enables the connection of high-power components. These include, amongst others, servers, UPS systems or other devices with corresponding power requirements.
The H05VV-F cable used is designed for indoor use and supports safe power transmission. The moulded connectors contribute to mechanical stability and increase service life with regular use.
Thanks to VDE certification, the cable meets relevant safety requirements and can be used in professional environments. The various lengths available offer additional flexibility during installation.

Plug: CEE 7/7 safety plug
Appliance plug: IEC 60320 C19
Cable type: H05VV-F
Rated voltage: 250 V
Maximum current: 16 A
Certification: VDE

InLine power cable 16A CEE 7/7 straight / IEC320/C19 3m. Cable length: 3 m, Connector 2: C19 coupler

How to use

Ensure both the device and the mains power are switched off before connecting. Insert the IEC C19 coupler into the device's C19 inlet and plug the 16A CEE 7/7 mains plug into an appropriate grounded socket. Route the cable to avoid sharp bends and heat sources, and secure it to prevent strain on connectors. After connections are secure, switch on the mains and then the connected device.

Recommendations

Use this cable only with compatible equipment rated for 250 V and up to 16 A. Do not use with damaged connectors or frayed insulation. For permanent installations in server rooms or cabinets, ensure cable management prevents excessive bending and allows adequate ventilation around connected equipment.