InLine patchkabel SF/UTP Cat.5e gul 7,5 m

InLine Patch Cable SF/UTP Cat.5e yellow 7.5m is a Cat.5e twisted-pair network cable with RJ-45 connectors on both ends. The 7.5 m cable supports Gigabit Ethernet (1 Gbit/s) and a maximum frequency of 125 MHz. SF/UTP shielding reduces electromagnetic interference to provide stable connections in structured cabling and patching environments. The yellow jacket improves visibility in network installations.

Advantages

The SF/UTP construction offers improved protection against external interference compared to unshielded cables while maintaining the flexibility of a patch cord. RJ-45 connectors on both ends ensure compatibility with switches, routers, sockets, patch panels and network cards. The 7.5 m length is suitable for typical rack and desk patching requirements, and the yellow colour helps with cable identification and management.

Suitable for

• Connecting switches, routers and patch panels
• Desktop and rack patching between wall sockets and network equipment
• Gigabit Ethernet connections (10/100/1000Base-T)
• Environments requiring reduced electromagnetic interference

Key specifications

• Cable type: Cat.5e SF/UTP (screened foiled twisted pair)
• Length: 7.5 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 1000 Mbit/s (1 Gbit/s)
• Frequency: up to 125 MHz
• Standard: 10/100/1000Base-T(X)
• Colour: Yellow

How to use

Plug the RJ-45 connector into the network port of your switch, router, patch panel or network interface card and the other RJ-45 connector into the corresponding port on the destination device. Route the cable to avoid sharp bends and pinching; keep it clear of high-voltage power lines to minimise interference. For rack installations, secure the cable with appropriate cable ties or management panels to maintain neat routing and strain relief.

Recommendations

Use this SF/UTP Cat.5e patch cable for short to medium runs within offices, server rooms or data closets where Gigabit connections are required and some shielding against electromagnetic interference is beneficial. Avoid installing in environments where higher category cabling (e.g., Cat6/Cat6a) is required for future-proofing or higher bandwidth needs.