InLine patchkabel SF/UTP Cat.5e rød 1,5 m

The InLine Patch Cable SF/UTP Cat.5e red 1.5m is a Category 5e twisted-pair network cable designed for connecting network components with RJ45 connectors, including switches, routers, wall sockets, patch panels and network cards. The cable supports Gigabit Ethernet (1 Gb/s) with a maximum frequency of 125 MHz and includes SF/UTP shielding to reduce electromagnetic interference. Its 1.5 m length and red jacket make it suitable for short connections and easy visual identification in cabling installations.

Advantages

SF/UTP shielding provides improved protection against external electromagnetic and radio-frequency interference compared with unshielded cables. Cat.5e specification ensures compatibility with Gigabit Ethernet networks up to 1 Gb/s and operation at frequencies up to 125 MHz. The 1.5 m length is convenient for short patching between devices, and the red jacket helps with cable identification and cable management.

Suitable for

• Connecting switches, routers and network cards within racks or on desks
• Patching between wall sockets and network devices
• Short horizontal and office cabling runs where visual identification is needed

Key specifications

• Standard: Cat.5e (SF/UTP)
• Bandwidth: up to 125 MHz
• Data rate: up to 1 Gb/s (Gigabit Ethernet)
• Length: 1.5 m
• Connector: RJ45 (both ends)
• Colour: Red
• Brand: InLine
• MPN: 72514R
• EAN: 4043718123568

How to use

Plug one RJ45 connector into the network port of your device (switch, router, network card or wall socket) and the other RJ45 connector into the corresponding port on the second device. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and keep it away from strong sources of electromagnetic interference where possible. For best results, use this cable for short patch connections within racks, between desk devices, or between a wall outlet and equipment.

Recommendations

Use the InLine SF/UTP Cat.5e patch cable for short-distance Gigabit connections. Avoid excessive bending and pulling; maintain bend radius recommended for twisted-pair cables. For environments with heavy EMI, verify shielding continuity at both ends and consider shielded connectors and proper grounding where required.