InLine strømkabel, C14 til schuko hun, sort, 2 m

This 2-meter power cable by InLine has an IEC C14 coupler on one end and a Schutzkontakt (protective earth) female plug on the other, allowing devices with an earthing contact plug to be connected to IEC outlets such as those on UPS units or power distribution units (PDUs) in 19" network cabinets. The cable uses H05VV-F construction for flexibility and durability. Please note that the maximum permissible power for the device connected to the protective contact socket must not exceed 2500 W.

Advantages

The cable provides a reliable connection between equipment with a Schutzkontakt plug and IEC C14 sockets, combining compatibility with standard UPS and PDU outlets and the safety of a protective earth conductor. Its H05VV-F cable type offers flexibility for routing in racks and enclosures while maintaining mechanical resilience. A 2 m length balances reach and cable management for typical server-room and desktop setups.

Suitable for

• Connecting PCs, monitors and other devices with Schutzkontakt (Schuko) plugs to IEC C14 outlets
• Powering equipment from UPS outputs or PDUs in 19" network cabinets
• Temporary or permanent power connections in office, server room or workshop environments

Key specifications

• Brand: InLine
• Manufacturer part number (MPN): 16659L
• EAN: 4043718281565
• Cable length: 2 m
• Connector A: IEC C14 coupler
• Connector B: Schutzkontakt (protective earth) female
• Cable type: H05VV-F
• Maximum permitted power at protective contact socket: 2500 W

How to use

Insert the IEC C14 coupler into the corresponding IEC male outlet on the UPS, PDU or power supply. Plug the Schutzkontakt female connector to the device's earthing contact plug. Ensure connectors are fully seated and the earthing contact is intact. Verify that the connected device's power rating does not exceed 2500 W before energizing the circuit.

Recommendations

Use the cable in dry, indoor environments and avoid routing near sharp edges or heat sources. Regularly inspect the cable and connectors for damage; replace if any insulation cracks or connector deformation are found. Do not exceed the specified maximum power of 2500 W.