Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid

Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
1.827,92 kr.
PDF
PDF
Lagerstatus 19 Produktkode 1725607 Model TF3-360SCW Garanti 2 år

Levering & returnering

Forventet levering tirsdag den 1. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

Jonsbo TF3-360SCW AiO liquid CPU cooler 360mm in white is a closed-loop cooling solution that combines a 360 mm aluminium radiator, an integrated pump-head and three white ARGB fans into a single unit. It is designed to remove heat from desktop processors efficiently while offering customizable ARGB lighting that can be synchronized with compatible motherboards. The cooler is aimed at systems that require a 360 mm radiator and a compact installation profile for high-load gaming rigs and workstations.

Advantages

The unit offers a high-surface-area 360 mm radiator for improved heat dissipation and a pre-assembled pump that reduces installation complexity. The three included ARGB fans provide airflow tuned for radiator use and permit lighting customization when paired with compatible controllers or motherboard software. The white finish helps integrate the cooler into light-themed builds while the closed-loop design requires minimal maintenance compared with custom water-cooling loops.

Suitable for

  • High-performance gaming desktops with overclocked or high-TDP CPUs
  • Workstation builds that demand sustained cooling under heavy computational loads
  • PC builds with support for 360 mm radiators and standard top/front mounting locations
  • Systems where ARGB lighting is desired for visual consistency with other components

Key specifications

  • Radiator size: 360 mm, multi-fin aluminium radiator for increased thermal surface area
  • Fan configuration: three 120 mm ARGB fans optimized for radiator airflow
  • Lighting: addressable RGB lighting on fans and pump housing, compatible with motherboard sync
  • Colour/finish: white components and housing for light-themed builds
  • Compatibility: supports mainstream desktop CPU socket types (refer to motherboard/vendor for exact socket fitment)
  • Form factor: closed-loop all-in-one cooler integrating pump, tubes and radiator in a single assembly

How to use

Mount the radiator to a suitable case location that supports a 360 mm radiator, typically the top or front panel, ensuring clearance for fans and other components. Attach the three included ARGB fans to the radiator in the recommended push or pull orientation for optimal airflow. Secure the pump-head to the CPU using the supplied mounting hardware and thermal interface material as per the installation manual. Connect the pump power and fan headers to the motherboard or included controller, and configure ARGB lighting through compatible motherboard software or controller controls. Verify secure fittings and cable routing before powering the system.

Recommendations

For consistent cooling performance, install the radiator where it can intake or exhaust fresh air depending on case airflow design, keep fan curves configured in BIOS or software to match CPU loads, and verify ARGB sync compatibility with your motherboard. Regularly inspect tubing and fan operation during routine system maintenance; closed-loop design minimizes servicing but ensuring unobstructed airflow and clean dust filters will help maintain thermal efficiency.

Vigtigste egenskaber
  • High-performance gaming desktops with overclocked or high-TDP CPUs
  • Workstation builds that demand sustained cooling under heavy computational loads
  • PC builds with support for 360 mm radiators and standard top/front mounting locations
  • Systems where ARGB lighting is desired for visual consistency with other components
  • Radiator size: 360 mm, multi-fin aluminium radiator for increased thermal surface area
  • Fan configuration: three 120 mm ARGB fans optimized for radiator airflow
  • Lighting: addressable RGB lighting on fans and pump housing, compatible with motherboard sync
  • Colour/finish: white components and housing for light-themed builds
  • Compatibility: supports mainstream desktop CPU socket types (refer to motherboard/vendor for exact socket fitment)
  • Form factor: closed-loop all-in-one cooler integrating pump, tubes and radiator in a single assembly

Specifikationer

Specifikationer
Belysnings-LED
ARGB
Belysningsfarve
ARGB
Produktfarve
Hvid
Type
AIO-væskekøler
Prishistorik for de seneste 6 måneder
Jonsbo TF3-360SCW AiO flydende CPU-køler 360 mm, ARGB, hvid
Aktuel
1.827,92 kr.
Laveste 7 d.
1.810,07 kr.
Højeste 7 d.
1.827,92 kr.
Ændring 24 timer
0,00 kr.   0%
Ændring 7 d.
+17,85 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere JONSBO-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier