Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Kabel Digitus DK-SCEC66-0050 6 mm² MC4 5 m sort rød

Kabel Digitus DK-SCEC66-0050 6 mm² MC4 5 m sort rød
Kabel Digitus DK-SCEC66-0050 6 mm² MC4 5 m sort rød
Kabel Digitus DK-SCEC66-0050 6 mm² MC4 5 m sort rød
Kabel Digitus DK-SCEC66-0050 6 mm² MC4 5 m sort rød
206,76 kr.
PDF
PDF
Lagerstatus 34 Produktkode 881556 Model DK-SCEC66-0050 Garanti 2 år

Levering & returnering

Forventet levering onsdag den 2. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The Digitus DK-SCEC66-0050 is a ready-to-use solar cable extension with pre-assembled MC4 plug and socket, designed for reliable DC connections in photovoltaic systems. With a 6 mm² tinned copper conductor and 5 m length, the cable supports modern high-voltage PV installations up to 1500 V DC. XLPO insulation and a robust jacket provide resistance to UV, moisture, ozone and mechanical stress, while flame-retardant properties (UL94 V-0) and low contact resistance ensure safe and efficient power transmission.

Advantages

High conductivity and corrosion protection are provided by the tinned copper conductor with a 6 mm² cross-section. Pre-assembled MC4 connectors allow tool-free, fast and secure connections. The cable is rated for voltages up to 1500 V DC and operates in temperatures from -40 °C to +85 °C. It is flame-retardant according to UL94 V-0, has low contact resistance (≤ 0.5 Ω) for minimal power loss, and meets international standards including EN 50618, EN 60332-1-2 (Eca) and EN 62852:2015. The flexible design and weatherproof construction make it suitable for permanent outdoor use.

Suitable for

  • Connecting solar panels in string and array configurations
  • Linking modules to inverters and junction boxes
  • Extension runs in residential and commercial PV systems

Key specifications

  • Length: 5 m
  • Conductor cross-section: 6 mm²
  • Voltage tolerance: up to 1500 V DC / 1000 V AC
  • Rated current: 30 A
  • Conductor material: tinned copper
  • Conductor structure: TS 84/0.285 mm
  • Conductor diameter: 3.0 mm
  • Insulation material: XLPO
  • Jacket material: XLPO
  • Plug material: PPE, PA66, halogen-free
  • Insulating diameter: 4.4 mm ±0.1 mm
  • Outer diameter: 6.1 mm ±0.2 mm
  • Temperature range: -40 °C to +85 °C
  • Contact resistance: ≤ 0.5 Ω
  • Insulation resistance: ≥ 500 MΩ·km
  • Dielectric strength: AC 6.5 kV / DC 15 kV (5 minutes)
  • Spark test: 7 kV
  • Standards & certificates: CE, EN 50618, EN 60332-1-2 (Eca), EN 62852:2015, UL94 V-0
  • Coat color: 1x black, 1x red
  • Connection 1: MC4 plug
  • Connection 2: MC4 socket
  • Ingress protection: IP65 / IP68

How to use

Install the cable by connecting the pre-assembled MC4 plug and socket to the corresponding MC4 connectors on the solar modules, inverters or junction boxes. Ensure connectors are fully engaged and locked; verify polarity (black = negative, red = positive) before energizing. Route the cable avoiding sharp edges and tight bends, observe the specified minimum bending radius, and secure the cable to prevent mechanical strain. Follow local electrical codes and the inverter or module manufacturer’s installation instructions when integrating the cable into the PV system.

Recommendations

For long-term outdoor performance, route the cable where it is protected from excessive mechanical wear and minimize exposure to concentrated chemical agents. Periodically inspect connectors for corrosion or damage and replace the cable if insulation or connectors are compromised. Use only compatible MC4 components and observe system voltage/current limits (1500 V DC, 30 A).
Vigtigste egenskaber
  • Connecting solar panels in string and array configurations
  • Linking modules to inverters and junction boxes
  • Extension runs in residential and commercial PV systems
  • Length: 5 m
  • Conductor cross-section: 6 mm²
  • Voltage tolerance: up to 1500 V DC / 1000 V AC
  • Rated current: 30 A
  • Conductor material: tinned copper
  • Conductor structure: TS 84/0.285 mm
  • Conductor diameter: 3.0 mm
  • Insulation material: XLPO
  • Jacket material: XLPO
  • Plug material: PPE, PA66, halogen-free
  • Insulating diameter: 4.4 mm ±0.1 mm
  • Outer diameter: 6.1 mm ±0.2 mm
  • Temperature range: -40 °C to +85 °C
  • Contact resistance: ≤ 0.5 Ω
  • Insulation resistance: ≥ 500 MΩ·km
  • Dielectric strength: AC 6.5 kV / DC 15 kV (5 minutes)
  • Spark test: 7 kV
  • Standards & certificates: CE, EN 50618, EN 60332-1-2 (Eca), EN 62852:2015, UL94 V-0
  • Coat color: 1x black, 1x red
  • Connection 1: MC4 plug
  • Connection 2: MC4 socket
  • Ingress protection: IP65 / IP68

Specifikationer

Specifikationer
Antal medfølgende produkter
2 pc(s)
DC-indgangsspænding
1500
Driftstemperatur (T-T)
-40 - 85
Emballagedybde
190 mm
Kabellængde
5 m
Kernestørrelse
6 mm²
Maks. strøm
30 A
Nemt at installere
Ja
Pakkehøjde
70 mm
Pakkens bredde
190 mm
Pakkens vægt
890 g
Plug and Play
Ja
Produktfarve
Rød, sort
Produkttype
Kabel
Stik 1 køn
Han
Stik 2, køn
Hun
Stiktype
MC4
Strømkildetype
DC
UV-bestandig
Ja
Vejrbestandig
Ja
Vægt
0.89 kg

Brochure

Åbn Brochure
Prishistorik for de seneste 6 måneder
Kabel Digitus DK-SCEC66-0050 6 mm² MC4 5 m sort rød
Aktuel
206,76 kr.
Laveste 7 d.
180,52 kr.
Højeste 7 d.
206,77 kr.
Ændring 24 timer
-0,01 kr.   0%
Ændring 7 d.
+26,24 kr.   +15%
Ændring 30 d.
+24,20 kr.   +13%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Samme serie og alternativer

6

Populære produkter i denne kategori

3
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier