Kabeladapter DeLOCK 66737

This Delock 66737 cable is a USB to serial RS-232 adapter with an RJ12 connector and a USB 2.0 Type-A plug. Designed to work with ProTuner software, it enables configuration, control and monitoring of Leadshine servo and stepper motors. The cable is 2 metres long and comes in black, providing a practical connection option for setups that require a direct USB-to-RJ12 serial interface.

Advantages

The adapter provides a direct USB 2.0 Type-A to RJ12 (RS-232) connection, eliminating the need for a separate serial port on the host device. Its 2 m length offers flexibility in placing devices and the compact RJ12 connector is compatible with Leadshine motor interfaces when used with ProTuner. The black jacket and standard connectors ensure straightforward installation and compatibility with common PC and control equipment.

Suitable for

• Connecting a PC or laptop USB port to Leadshine servo and stepper motor controllers via RJ12
• Configuring and tuning motors using ProTuner software
• Monitoring motor status and parameters during setup or maintenance

Key specifications

• Manufacturer: Delock (DELOCK)
• Model / MPN: 66737
• EAN: 4043619667376
• Interface: USB 2.0 Type-A to RJ12 (RS-232)
• Cable length: 2 m
• Colour: Black

How to use

Connect the USB Type-A plug to an available USB port on the PC or laptop. Plug the RJ12 connector into the RS-232 port on the Leadshine motor controller. Launch ProTuner software on the host computer and select the appropriate COM port assigned to the adapter. Use the software to perform configuration, control and monitoring tasks according to the motor and controller documentation.

Recommendations

Use a reliable USB port and ensure drivers for the USB-to-serial adapter are installed on the host system if required. Keep cable length and routing clear of high-voltage or high-current power lines to reduce electrical interference. Verify RJ12 pinout compatibility with the specific Leadshine controller model before operation.