Netværkskort DeLOCK 62949 intern Ethernet 1000 Mbit/s

The DeLOCK 62949 is an internal network card that adds one RJ45 Gigabit LAN port to a system. With an M.2 host interface and wired Ethernet connectivity, the card supports a maximum data transfer rate of 1000 Mbit/s and complies with IEEE 802.3, IEEE 802.3ab and IEEE 802.3u standards. The product is finished in a red colour and is intended for installation inside compatible systems to provide a reliable wired network connection.

Advantages

The DeLOCK 62949 offers a straightforward way to expand a system with a single Gigabit RJ45 port via an M.2 slot. It provides wired Ethernet performance up to 1000 Mbit/s and supports established Ethernet standards for broad compatibility. Its compact M.2 form factor fits inside systems where internal expansion is required, and the red finish makes the card easy to identify during installation.

Suitable for

• Adding a Gigabit RJ45 port to desktops or small form-factor PCs with an available M.2 slot
• Systems that require a wired Ethernet connection for low-latency or high-reliability networking
• Upgrading older systems that lack integrated Gigabit Ethernet

Key specifications

• Brand: DELOCK
• Model: 62949
• Interface: M.2 (host interface)
• Connectivity technology: Wired Ethernet
• Maximum data transfer rate: 1000 Mbit/s
• Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
• Port: 1 × RJ45 Gigabit LAN
• Colour: Red
• MPN: 62949
• EAN: 4043619629497

How to use

Power down the computer and disconnect it from the mains. Open the system case and locate an available M.2 slot that supports networking modules. Carefully insert the DeLOCK 62949 into the M.2 slot at the correct angle and secure it with the mounting screw supplied by the system or motherboard. Close the case, reconnect power and network cable to the RJ45 port, then start the system. Install any required drivers provided by the operating system or the manufacturer to enable full Gigabit Ethernet functionality.

Recommendations

Use a quality Cat5e or higher Ethernet cable to achieve Gigabit speeds and ensure the M.2 slot on your motherboard supports the card type before installation. Keep device drivers up to date for best compatibility and performance.