Netværkstransceivermodul BlueOptics AOM-AQS-107-B0C2-CX

The BlueOptics AOM-AQS-107-B0C2-CX is a compact fiber optic network transceiver module designed for 10G data communication. It supports a maximum data transfer rate of 10000 Mbit/s using an SFP+ fiber optic connector and an RJ-45 electrical interface. The module is CE- and FCC-certified, weighs 20 g and is intended for high-speed links in compatible server, switch and storage systems, including Supermicro platforms.

Advantages

The module offers 10G throughput in an SFP+ form factor with an RJ-45 interface, enabling high-speed copper connectivity in systems that accept SFP+ modules. Its lightweight construction and standardized MSA-compatible design simplify installation and interoperability across equipment from different vendors. CE and FCC certifications provide conformity with common regulatory requirements. The short maximum transfer distance of up to 30 m is suitable for data center and server-rack connections where low latency and reliable 10G links are required.

Suitable for

• 10 Gigabit links between switches, routers and servers within racks and short data center runs
• Upgrading SFP+ ports to 10GBASE-T copper connectivity where RJ-45 interfaces are required
• High-speed connections in Supermicro and other MSA-compliant hardware platforms
• Environments requiring CE and FCC compliant transceivers for regulatory conformity

Key specifications

• Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
• Maximum transfer distance: up to 30 m (copper RJ-45 link)
• Connector type: SFP+ module with RJ-45 interface
• Form factor: SFP+ compliant
• Product colour: Silver
• Weight: 0.02 kg
• Certifications: CE, FCC

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on the switch, router, server or storage device while the system is powered down or following the device manufacturer’s hot-swap procedure. Connect the RJ-45 copper cable to the module and configure the network interface on the host device if necessary. Verify link status and speed through the device management interface and check that the DDM/DOM diagnostics (if supported by the host) report normal operating values for power and temperature.

Recommendations

Install the transceiver in MSA-compliant ports to ensure proper compatibility; use Cat6a/Cat7 copper cabling for optimal 10GBASE-T performance over short runs and keep firmware and driver levels of host devices up to date to maintain link stability and diagnostics support.