PoE-adapter HPE R6P67A

The HPE R6P67A PoE adapter supports IEEE 802.3at power delivery and provides up to 30 W total PoE budget in a compact enclosure. Designed by HP Enterprise for use with compatible network equipment, this adapter supplies power over Ethernet to endpoints while occupying minimal space. Its small footprint—30 mm wide, 66 mm deep and 163 mm high—and light weight make it suitable for installations where space and discreet cabling are important.

Advantages

The adapter adheres to the IEEE 802.3at standard and delivers a 30 W PoE budget to power single or multiple compatible devices depending on the connected equipment. Compact dimensions and a lightweight build simplify mounting and placement in racks, cabinets, or wall-mounted network points. The unit is intended to maintain reliable power delivery to connected devices to support continuous network operation and reduce the need for separate power supplies at each endpoint.

Suitable for

• Powering IP phones and small PoE-enabled access points
• Supplying power to surveillance cameras with moderate power requirements
• Deployments where compact PoE injectors are required for space-constrained environments

Key specifications

• PoE standard: IEEE 802.3at (PoE+)
• Total PoE budget: 30 W
• Dimensions (W × D × H): 30 mm × 66 mm × 163 mm
• Weight: 0.0454 kg

How to use

Install the PoE adapter near the network switch or at the network endpoint according to the site layout and cable runs. Connect the network data cable from the switch or upstream device to the adapter input and connect the output to the PoE-powered device. Ensure connected devices comply with IEEE 802.3at power negotiation so the adapter can allocate power within the 30 W budget. Verify stable operation by checking device power indicators and network link status after connection.

Recommendations

Place the adapter in a ventilated location and avoid exposure to moisture or excessive heat. When using multiple PoE devices, plan power distribution so individual devices do not exceed the adapter's total 30 W budget. For permanent installations, follow HP Enterprise mounting and safety guidelines and confirm compatibility with the specific network equipment model in use.