Projektionslærred Reflecta CrystalLine Motor 1:1

The Reflecta CrystalLine Motor 1:1 projection screen offers a motorized, easy-to-use display surface with a viewable area of 2.00 m × 2.00 m and a native 1:1 aspect ratio. The screen has a matte white front surface and a black backing, a thin 0.30 mm fabric thickness and an overall design intended for wall or ceiling mounting. Motorized retraction and extension are controlled by the included radio remote control.

Advantages

The CrystalLine Motor combines a compact, neutral-design screen cloth with a motor drive for smooth operation and simple installation. The material provides a gain factor of 1.1 and a wide 120° viewing angle for consistent image reproduction across the surface. A narrow black border frames the image for improved contrast and easier alignment.

Suitable for

• Business presentations and meeting rooms
• Classrooms and training facilities
• Home cinema setups with a square (1:1) projection requirement
• Temporary or fixed installations that require wall or ceiling mounting

Key specifications

• Brand: REFLECTA
• Model: CrystalLine Motor 1:1 (MPN 87672)
• Viewable area: 2.00 m × 2.00 m (width × height)
• Aspect ratio: 1:1
• Projection surface: matte white front / black rear
• Fabric thickness: 0.30 mm
• Gain: 1.1
• Viewing angle: 120°
• Mounting: wall or ceiling
• Control: radio remote control (included)
• EAN: 4005039876721

How to use

Mount the screen housing securely to a wall or ceiling using appropriate fasteners for the installation surface. Connect the motor to the power supply according to the manufacturer’s instructions, then use the included radio remote control to extend and retract the screen as needed. Position the projector so the projected image fills the 2.00 m × 2.00 m viewable area and adjust focus and keystone correction on the projector for a sharp, square image.

Recommendations

For best image quality, install the screen in a location free from direct sunlight and minimize ambient light on the projection surface. Regularly check mounting hardware and keep the surface clean with a soft, dry cloth; avoid abrasive cleaners and excessive moisture.