Ringnøgle Gedore 6100700

Combination Wrench Gedore 6100700 is a hand tool manufactured from Gedore vanadium steel (31CrV3) with chrome plating. The wrench conforms to DIN 3113-like design, has a 15° offset ring end from the shaft and a UD profile; the shaft is produced in a girder pattern. Overall dimensions include a depth of 80 mm, height of 40 mm and a weight of 120 g.

Advantages

The chrome-plated 31CrV3 vanadium steel construction provides resistance to wear and corrosion while maintaining strength. The 15° offset ring end and UD profile improve access to fasteners in confined spaces. The girder-pattern shaft increases rigidity and helps resist bending under load. Compact dimensions and moderate weight make the tool convenient to handle and position during mechanical work.

Suitable for

Key specifications

How to use

Select the Combination Wrench Gedore 6100700 sized to match the fastener. Place the open or ring end over the nut or bolt, ensuring full seating of the profile on the fastener to avoid rounding. Use steady, controlled force and position the 15° offset ring end to gain clearance when working in tight locations. Maintain tool alignment with the fastener axis to reduce side loads on the wrench.

Recommendations

Inspect the chrome plating and wrench profile before use; do not use a damaged or excessively worn wrench. Clean and lightly oil the tool after use to limit corrosion. Avoid using the wrench as a hammer or lever extension; if higher torque is required use an appropriate larger tool or torque wrench.