SATA-forbindelseskabel Digitus AK-400102-003-R

The Digitus SATA connection cable AK-400102-003-R is an internal SATA III data cable designed to connect 2.5"/3.5" Serial-ATA hard drives and optical drives (CD/DVD/Blu‑ray) to a motherboard. It features a secure latch for a reliable connection and is backward compatible with SATA revision II and I. The cable is 0.3 m long, uses standard 7-pin SATA connectors on both ends and comes in red color.

Advantages

This SATA cable supports SATA III transfer speeds while remaining compatible with older SATA standards, providing dependable data transfer between storage devices and the mainboard. Its latch mechanism helps prevent accidental disconnection and the short 0.3 m length reduces cable clutter inside compact PC cases. The cable’s compact size and light weight make it convenient for installations in home and office systems.

Suitable for

• Connecting internal Serial-ATA hard drives (HDD/SSD) to the motherboard
• Connecting internal optical drives (CD/DVD/Blu‑ray) to the motherboard
• Upgrading or replacing internal SATA cables in desktop PCs

Key specifications

• Model: Digitus AK-400102-003-R
• Cable type: SATA III
• Cable length: 0.3 m
• Connectors: SATA 7-pin to SATA 7-pin
• Compatibility: Backward compatible with SATA rev. II/I
• Colour: Red
• MPN: AK-400102-003-R
• EAN: 4016032299943

How to use

Power off the computer and unplug it from the mains before installation. Connect one 7-pin SATA connector to the corresponding SATA port on the motherboard and the other connector to the SATA port on the drive, ensuring the latch clicks into place for a secure fit. Reconnect power, boot the system and verify that the drive is detected in the BIOS/UEFI or operating system.

Recommendations

For best results, use this Digitus SATA III cable for internal connections inside desktop or small form factor cases where a short, secure cable is preferred. Avoid routing the cable near high-heat components and ensure connectors are aligned before inserting to prevent pin damage.