SATA-kabel DeLOCK 85090 sort blå

This SATA cable by Delock enables the internal connection of various SATA devices such as HDDs, controller cards or flash memories. It supports the SATA III standard with a maximum data transfer rate of up to 6 Gb/s and is backwards compatible with earlier SATA versions.

Advantages

The DeLOCK 85090 features two 7-pin SATA connectors with metal clips that click securely into place and a design that routes the cable downwards when connected to a hard drive. Its black and blue colouring and polybag packaging make it convenient for storage and installation in PC builds.

Suitable for

• Connecting internal SATA hard drives (HDD)
• Connecting SATA SSDs and optical drives
• Linking SATA controller or expansion cards to storage devices
• Replacing or upgrading internal SATA cables in desktop PCs

Key specifications

• Cable type: SATA III
• Connector 1: SATA 7-pin
• Connector 2: SATA 7-pin
• Maximum transfer rate: up to 6 Gb/s
• Product colour: Black, Blue
• Manufacturer part number (MPN): 85090

How to use

Power off the computer and open the case. Route the cable from the motherboard or controller card to the target device, orienting the connector so the locking clip can engage. Insert the 7-pin connectors into the SATA ports until the metal clips click. Close the case, power on the system and verify device detection in BIOS/UEFI or the operating system.

Recommendations

For best results, use the cable for internal connections in desktop PCs and avoid tight bends near the connectors. When connecting older SATA devices, note that transfer speeds will be limited to the maximum supported by those devices.