SATA-kabel DeLOCK SATA III 0,2 m

This SATA cable by DELOCK (SATA III, 0.2 m) enables internal connection of SATA devices such as hard drives, controller cards or flash memories. The cable uses 7‑pin SATA connectors on both ends and supports the SATA III standard with data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions.

Advantages

The compact 0.2 m length is suitable for tight spaces and reduces cable clutter inside the PC. Metal clips on the connectors secure the connection and prevent accidental disconnection. The cable is built for reliable signal transmission and mechanical durability and is finished in black and red for an unobtrusive appearance.

Suitable for

• Internal connection of 2.5" and 3.5" HDDs and SSDs
• Connecting SATA controller cards to drives
• Use in compact PC builds or server racks with limited space

Key specifications

• Cable type: SATA III
• Cable length: 0.2 m
• Connectors: SATA 7‑pin to SATA 7‑pin
• Maximum data transfer rate: up to 6 Gb/s (backwards compatible)
• Colour: Black, Red
• Brand: DELOCK, MPN: 83972, EAN: 4043619839728

How to use

Connect one 7‑pin SATA connector to the SATA port on the motherboard or controller card and the other connector to the SATA port on the drive. Ensure the metal clip engages to lock the connector in place. When connecting to a horizontally mounted HDD, the cable is intended to be routed upwards from the drive. Verify both ends are fully seated before powering the system.

Recommendations

Use this short SATA III cable for runs inside compact cases or near controller cards where minimal slack is required. For longer distances choose a cable with greater length; for older SATA devices expect lower transfer rates due to backward compatibility.