Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s

SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
60 md.
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
332,03 kr.
PDF
PDF
Lagerstatus 266 Produktkode 1461482 Model 1184561PG1-BO Garanti 5 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics 1184561PG1-BO SFP transceiver module is a compact fiber optic interface designed for network connections requiring a maximum data transfer rate of 125 Mbit/s. The module uses an SFP interface, has an aluminium-coloured metal housing and weighs approximately 20 g. It is intended for insertion into SFP ports on compatible network equipment to provide a fiber-optic link for data transmission.

Advantages

The module's small SFP form factor enables flexible deployment in switches, routers and other network devices that accept SFP transceivers. Its metal body provides mechanical protection and thermal dissipation while keeping the unit lightweight. BlueOptics manufacturing and MSA-compatible design aim to ensure physical interoperability with standard SFP slots. The unit supports optical transmission over fiber and can be used where electromagnetic immunity or galvanic isolation is required.

Suitable for

  • Adding a fiber interface to switches and routers with SFP ports
  • Establishing point-to-point fiber links for data transfer up to 125 Mbit/s
  • Network segments that require EMI-immune connections or galvanic isolation

Key specifications

  • Interface type: SFP small form-factor pluggable
  • Maximum data transfer rate: 125 Mbit/s
  • Housing: aluminium-coloured metal body
  • Weight: approx. 0.02 kg (20 g)

How to use

Install the BlueOptics 1184561PG1-BO by inserting the module into a compatible SFP slot until it clicks into place; ensure the host device is powered off or that hot-swap is supported by the equipment according to the manufacturer's instructions. Connect an appropriate fibre patch cable to the transceiver's optical connector and to the remote device. Configure the host device port as required for the network protocol in use and verify link status in the host's management interface. Follow the network equipment vendor's procedures for enabling and monitoring the port.

Recommendations

Use single-mode or multimode fiber and connectors that match the transceiver and your network design; avoid excessive bending of fiber cables and follow ESD procedures when handling the module. Verify compatibility with your host hardware and firmware; consult the equipment documentation if the device requires transceiver validation or specific settings.

Vigtigste egenskaber
  • Adding a fiber interface to switches and routers with SFP ports
  • Establishing point-to-point fiber links for data transfer up to 125 Mbit/s
  • Network segments that require EMI-immune connections or galvanic isolation
  • Interface type: SFP small form-factor pluggable
  • Maximum data transfer rate: 125 Mbit/s
  • Housing: aluminium-coloured metal body
  • Weight: approx. 0.02 kg (20 g)

Specifikationer

Specifikationer
Driftstemperatur (T-T)
0 - 70
Fiberoptisk stik
LC
Interfacetype
SFP
Maks. overførselsafstand
10000 m
Maksimal dataoverførselshastighed
125 Mbit/s
Mængde pr. pakke
1 pc(s)
Pakkens vægt
30 g
Produktfarve
Aluminium
Rx-bølgelængde (maks.)
1310 nm
SFP-transceivertype
Fiberoptisk
Singlemode-fiber (SMF) understøttet
Ja
Tx-bølgelængde (maks.)
1310 nm
Vægt
0.02 kg
Prishistorik for de seneste 6 måneder
SFP-transceivermodul BlueOptics 1184561PG1-BO 125 Mbit/s
Aktuel
332,03 kr.
Laveste 7 d.
327,39 kr.
Højeste 7 d.
332,04 kr.
Ændring 24 timer
-0,02 kr.   0%
Ændring 7 d.
+4,64 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier