Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s

SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
60 md.
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
518,32 kr.
PDF
PDF
Lagerstatus 2143 Produktkode 1464867 Model 330-2409-BO Garanti 5 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics 330-2409-BO is an SFP+ transceiver module engineered for fiber optic links requiring up to 10000 Mbit/s. Its compact SFP+ form factor makes it compatible with a wide range of switches, routers and network interface devices that accept hot-pluggable SFP+ modules. The module is lightweight and finished in silver; it is designed for environments where reliable, high-speed point-to-point or uplink connections are needed. Compliance with CE, FCC and RoHS standards is indicated for regulatory and environmental conformity, and the stated MTBF of 1,000,000 hours provides an expected long service life under normal operating conditions.

Advantages

The SFP+ form factor allows simple installation into standard SFP+ ports without requiring adapter brackets. Support for a 10000 Mbit/s data rate ensures suitability for 10 Gigabit Ethernet and other high-throughput applications. The compact, low-weight design minimizes space and power impact in dense networking racks. Regulatory compliance and a high MTBF indicate predictable behaviour and reduced need for frequent replacements.

Suitable for

  • 10 Gigabit Ethernet uplinks and aggregation ports
  • High-speed server-to-switch connections in data centres
  • Fiber backbone links between network closets or buildings
  • Network equipment upgrades where SFP+ compatibility is required

Key specifications

  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Form factor: Hot-pluggable SFP+ module
  • Weight: 0.02 kg
  • Colour: Silver
  • Regulatory compliance: CE, FCC, RoHS
  • Reliability: Mean time between failures (MTBF) — 1,000,000 hours

How to use

Install the BlueOptics SFP+ transceiver by inserting it into a compatible SFP+ port until it clicks into place; ensure the host device is powered according to the manufacturer’s guidance. Connect the appropriate fiber optic cable and verify link status through the host device management interface. When removing the module, follow hot-swap procedures supported by the host to avoid link disruption. Observe standard electrostatic discharge (ESD) precautions when handling the transceiver.

Recommendations

For optimal performance, use single-mode or multi-mode fiber and connectors that match the transceiver’s optical specifications and the host device requirements. Keep firmware and device drivers up to date on network equipment, and perform periodic link checks in mission-critical deployments.

Vigtigste egenskaber
  • 10 Gigabit Ethernet uplinks and aggregation ports
  • High-speed server-to-switch connections in data centres
  • Fiber backbone links between network closets or buildings
  • Network equipment upgrades where SFP+ compatibility is required
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Form factor: Hot-pluggable SFP+ module
  • Weight: 0.02 kg
  • Colour: Silver
  • Regulatory compliance: CE, FCC, RoHS
  • Reliability: Mean time between failures (MTBF) — 1,000,000 hours

Specifikationer

Specifikationer
Digital diagnosticovervågning (DDM)
Ja
Duplexsystem
Fuld
Ethernet LAN
Ja
Ethernet-interfacetype
10 Gigabit Ethernet
Fiber-Ethernet-kabelteknologi
10GBASE
Fiberoptisk stik
LC
Formfaktor
SFP+
Gennemsnitlig tid mellem fejl (MTBF)
1000000 h
Hot-plug-understøttelse
Ja
Hot-swap
Ja
Interfacetype
SFP+
Maks. driftstemperatur
70 °C
Maks. overførselsafstand
10000 m
Maksimal dataoverførselshastighed
10000 Mbit/s
Min. driftstemperatur
0 °C
Mærkekompatibilitet
DELL
Nemt at installere
Ja
Overensstemmelsescertifikater
RoHS, Federal Communications Commission (FCC), CE
Overholdelse af bæredygtighedskrav
Ja
Produktfarve
Sølv
Rx-bølgelængde (maks.)
1310 nm
SFP-transceiverstandard
LR
SFP-transceivertype
Fiberoptisk
Singlemode-fiber (SMF) understøttet
Ja
Tx-bølgelængde (maks.)
1310 nm
Vægt
0.02 kg

Brochure

Åbn Brochure

Dokument

Åbn Dokument
Prishistorik for de seneste 6 måneder
SFP+-transceivermodul BlueOptics 330-2409-BO 10000 Mbit/s
Aktuel
518,32 kr.
Laveste 7 d.
510,47 kr.
Højeste 7 d.
518,35 kr.
Ændring 24 timer
-0,03 kr.   0%
Ændring 7 d.
+7,85 kr.   +2%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier