SFP+-transceivermodul BlueOptics 3FE63624AA-BO 10000 Mbit/s

The BlueOptics 3FE63624AA-BO SFP+ transceiver module is a compact fiber optic module designed for 10 Gbit/s class network links. Housed in a metal casing and weighing 20 g, this SFP+ module supports multimode fiber transmission and provides a standardized LC duplex interface for optical connections. It is built to industry MSA dimensions and offers a high mean time between failures (MTBF) to support continuous operation in data center and enterprise network environments.

Advantages

The module delivers a maximum data transfer rate of 10000 Mbit/s and is compatible with SFP+ ports that accept MSA-compliant transceivers. Its metal housing provides mechanical stability and electromagnetic shielding while the silver finish supports easy identification in racks and patch panels. Designed for high availability, the transceiver's MTBF rating supports long operational lifetimes and reduced maintenance intervals.

Suitable for

• 10 Gbit/s short-range multimode fiber links in switches and routers
• High-speed server uplinks and storage networking
• Data center fiber patch panels and optical cross-connects
• Network upgrades where SFP+ MSA compatibility is required

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Connector: LC duplex (multimode fiber)
• Housing material: metal
• Colour: silver
• Weight: 0.02 kg
• Reliability: MTBF approx. 1,000,000 hours

How to use

Install the SFP+ transceiver into a compatible SFP+ cage until it latches securely, then connect an LC duplex multimode fiber patch cord. Ensure the network device recognizes the module and that firmware or driver restrictions do not block third-party transceivers. Observe polarity when connecting duplex fibers so transmit and receive fibers are matched. When removing the module, power down or follow hot-swap procedures recommended by the host device to avoid signal interruption.

Recommendations

Use multimode fiber patch cords and appropriate fiber management to achieve the specified range and signal quality. Verify host-device support for SFP+ modules and, if available, enable digital diagnostics (DDM/DOM) in the host to monitor operating parameters. Store unused transceivers in protective caps and anti-static packaging to prevent contamination and electrostatic damage.