SFP-transceivermodul BlueOptics AA1419050-E6-NT-BO 1250 Mbit/s

The BlueOptics AA1419050-E6-NT-BO SFP transceiver module is a compact fiber optic interface module designed for network equipment that supports small form-factor pluggable ports. With a maximum data transfer rate of 1250 Mbit/s and an industry-standard SFP form factor, this transceiver enables single-port fiber connections for switches, routers and media converters. The unit is finished in silver, weighs approximately 20 g and meets CE, FCC and RoHS compliance requirements. Its reported mean time between failures (MTBF) of 1,000,000 hours provides a baseline reliability expectation for deployment in standard networking environments.

Advantages

The module’s SFP form factor ensures compatibility with a wide range of networking devices that accept pluggable transceivers. A defined maximum data rate of 1250 Mbit/s allows use in legacy and current fibre-based links where this throughput is required. Compliance with CE, FCC and RoHS standards indicates conformity with common safety, electromagnetic and environmental regulations. The modest weight and compact dimensions facilitate easy handling and installation in rack-mounted equipment or compact network appliances.

Suitable for

• Connecting single-mode or multimode fiber links in switches, routers and media converters that accept SFP modules
• Replacing or upgrading SFP ports where 1250 Mbit/s throughput is specified
• Laboratory testing and network staging where a standard SFP transceiver is required

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Before installation, ensure the host device supports SFP transceivers and that the intended fiber type and connector are compatible. Power off the network device if recommended by the manufacturer, then insert the transceiver into an empty SFP slot until it seats securely; follow the host device prompt or indicator LEDs to confirm link status. Connect the appropriate fiber patch cable to the transceiver’s optical interface, observing proper fiber handling and cleanliness. After installation, enable or configure the port in the network device management interface as required.

Recommendations

Maintain clean optical connectors and inspect fiber endfaces before connection to minimize signal loss. Store unused transceivers in anti-static packaging and avoid exposure to extreme temperatures or moisture. When replacing modules, verify compatibility with the network device’s supported transceiver list and firmware requirements to ensure correct operation.