Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC

SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
60 md.
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
332,01 kr.
PDF
PDF
Lagerstatus 1721 Produktkode 1474459 Model HFBR5710LP-BO Garanti 5 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics HFBR5710LP-BO is an SFP fiber optic transceiver module with an LC duplex connector designed for reliable 1000Base-SX optical links over multimode fiber. Constructed in an aluminium housing and weighing approximately 20 g, this compact SFP module supports Gigabit Ethernet and similar high-speed protocols, providing up to 1.25 Gbit/s data rate and multimode reach suitable for short-range connections. The module uses 850 nm transmitter and receiver optics and complies with MSA mechanical specifications for hot-pluggable SFP modules.

Advantages

The module provides standardized SFP form-factor compatibility and LC duplex connectivity for straightforward installation in compatible switches, routers and storage devices. Built with components that meet industry MSA standards, it supports 1000Base-SX class performance with low power consumption and aluminium casing for effective heat dissipation. Digital diagnostic monitoring (DDM/DOM) capability is available when supported by the host hardware, enabling real-time monitoring of voltage, laser bias current, output/input optical power and module temperature.

Suitable for (tasks / use cases)

Key specifications

How to use

Ensure the host device supports 1000Base-SX SFP modules and, if DDM/DOM is required, that the platform exposes diagnostic functions. Handle the transceiver by its housing; avoid touching the optical interfaces and keep protective dust caps in place until connection. Insert the BlueOptics HFBR5710LP-BO into a compatible SFP slot until it latches, then connect LC duplex multimode patch cords to the transmit and receive ports. Configure the device interface settings in the host system as required for Gigabit Ethernet and verify link status using the switch or router management interface. For removal, power down or administratively disable the port if recommended by the host vendor, then unlatch and extract the transceiver while replacing dust caps on the module and cable ends.

Recommendations

To achieve reliable optical links, use high-quality multimode fiber and LC patch cords matched to the desired reach and fiber type (OM1/OM2/OM3/OM4). Confirm firmware and software compatibility with the host device before deployment and monitor DDM parameters where available to detect degradation in power, temperature or voltage early.
Vigtigste egenskaber
  • Short-range Gigabit Ethernet links over multimode fiber (data centers, server rooms)
  • Switch-to-switch and switch-to-router connections within campus networks
  • Storage area network (SAN) uplinks and interconnects
  • Replacement or upgrade of existing 1000Base-SX SFP modules in compatible hardware
  • Form factor: SFP (small form-factor pluggable)
  • Connector type: LC duplex
  • Wavelength: 850 nm (transmitter and receiver)
  • Data rate: up to 1.25 Gbit/s (1000Base-SX)
  • Optical fiber type: multimode fiber
  • Typical reach: up to ~550 meters on appropriate multimode fiber (depends on fiber type and installation)
  • Housing material: aluminium
  • Weight: approximately 0.02 kg
  • Digital Diagnostic Monitoring (DDM/DOM): supported if enabled by host device

Specifikationer

Specifikationer
Driftstemperatur (T-T)
0 - 70
Ethernet LAN
Ja
Ethernet-interfacetype
1,25 Gigabit Ethernet
Fiber-Ethernet-kabelteknologi
1000BASE
Fiberoptisk stik
LC
Garantiperiode
5 år
Interfacetype
SFP
Maks. overførselsafstand
550 m
Mængde pr. pakke
1 pc(s)
Pakkens vægt
30 g
Produktfarve
Aluminium
Rx-bølgelængde (maks.)
850 nm
SFP-transceivertype
Fiberoptisk
Tx-bølgelængde (maks.)
850 nm
Vægt
0.02 kg
Prishistorik for de seneste 6 måneder
SFP-transceivermodul BlueOptics HFBR5710LP-BO fiber LC
Aktuel
332,01 kr.
Laveste 7 d.
315,04 kr.
Højeste 7 d.
332,04 kr.
Ændring 24 timer
-0,03 kr.   0%
Ændring 7 d.
+16,98 kr.   +5%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier