Skæremaskine Metabo MFE 40

The Metabo MFE 40 cutting machine is a compact electric cutter designed for controlled, precise cuts in a variety of materials. Equipped with a 12.5 cm disc and a rated speed of 4200 RPM, the tool balances cutting power and maneuverability. The unit runs on AC power and is supplied with two discs to get started. Its nominal input of 1900 W and rated output of 1120 W provide consistent performance for short to medium-depth cutting tasks, with a maximum cutting depth of 1 cm.

Advantages

The Metabo MFE 40 delivers reliable cutting performance through a combination of high input power and a stable rated speed, enabling even cuts with minimal vibration. The compact disc diameter improves access in tight spaces while the supplied pair of discs ensures immediate usability. Built to Metabo standards, the machine features a solid motor and a construction that supports repetitive use in workshop and site environments.

Suitable for

• Trimming tiles, stone or ceramic edges
• Small-scale masonry or concrete scoring
• Cutting thin metal sheets or profiles
• Detail work in renovation and finishing jobs

Key specifications

• Disc diameter: 12.5 cm
• Rated speed: 4200 RPM
• Nominal input power: 1900 W
• Rated output power: 1120 W
• Maximum cutting depth: 1 cm
• Power supply: AC mains
• Includes two cutting discs

How to use

Before use, install one of the supplied discs according to the manufacturer's mounting instructions and secure the guard. Connect the machine to a suitable AC power outlet. Position the cutter so the disc meets the workpiece at the intended cutting line, apply steady forward pressure and maintain a controlled feed speed to avoid overloading the motor. Allow the tool to reach full speed before engaging the material and follow safe cutting distances from edges and fixtures. After cutting, switch off power and allow the disc to stop completely before setting the tool down.

Recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and gloves. Select the disc type suitable for the material being cut to maximize disc life and cutting quality. Avoid prolonged continuous operation to prevent overheating; allow cooling periods during extended use and inspect discs for wear or damage before each session.