Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Testledningssæt Voltcraft MS-4P — 1,20 m, sort/røde isolerede ledninger

Testledningssæt Voltcraft MS-4P — 1,20 m, sort/røde isolerede ledninger
Testledningssæt Voltcraft MS-4P — 1,20 m, sort/røde isolerede ledninger
390,94 kr.
PDF
PDF

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

Voltcraft MS-4P test lead set consists of two insulated leads — one black and one red — each 1.20 m long. The leads are intended for electrical measurements and test bench use, providing clear polarity identification and flexible reach for multimeters, power supplies and laboratory equipment. The set is suitable for routine maintenance, diagnostic work and circuit testing where visible, insulated connections are required.

Advantages

The paired black and red insulation makes polarity recognition immediate, reducing connection errors. At 1.20 m length each, the leads offer sufficient reach on workbenches while remaining manageable and tangle-resistant. Insulated conductors deliver protection against accidental contact and help maintain signal integrity during measurements. The simple, robust construction supports repeated use in maintenance and lab environments.

Suitable for

  • Multimeter measurements in workshops and labs
  • Connecting power supplies to devices under test
  • Bench testing and circuit verification
  • Routine electrical maintenance and diagnostics

Key specifications

  • Two insulated leads: one black, one red
  • Length per lead: 1.20 m
  • Flexible insulated conductor for safe handling
  • Designed for measurement and test bench applications

How to use

Connect the red lead to the positive terminal and the black lead to the negative or common terminal of the measurement device or power source. Ensure connectors are firmly attached to the terminals of the multimeter, power supply or test point before taking measurements. Route the leads to avoid sharp edges or moving parts and keep insulation intact; replace the leads if damage to the insulation or conductor is observed. Observe standard safety procedures for the specific electrical environment and measurement task.

Recommendations

Use the colour-coded leads to streamline setup and minimize polarity mistakes. For high-voltage, high-current or precision measurement tasks, verify that these leads meet the required voltage and current ratings for your equipment and environment before use. Store the leads coiled without tight bends and inspect insulation regularly to maintain safe operation.

Vigtigste egenskaber
  • Multimeter measurements in workshops and labs
  • Connecting power supplies to devices under test
  • Bench testing and circuit verification
  • Routine electrical maintenance and diagnostics
  • Two insulated leads: one black, one red
  • Length per lead: 1.20 m
  • Flexible insulated conductor for safe handling
  • Designed for measurement and test bench applications

Specifikationer

Specifikationer
Vægt
0.1 kg
Prishistorik for de seneste 6 måneder
Testledningssæt Voltcraft MS-4P — 1,20 m, sort/røde isolerede ledninger
Aktuel
390,94 kr.
Laveste 7 d.
385,37 kr.
Højeste 7 d.
390,98 kr.
Ændring 24 timer
-0,04 kr.   0%
Ændring 7 d.
+5,57 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere VOLTCRAFT-produkter i denne kategori

12

Populære produkter i denne kategori

2
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier