Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Tømrervinkel Stanley 1-45-530 rustfrit stål 60 cm

Tømrervinkel Stanley 1-45-530 rustfrit stål 60 cm
Tømrervinkel Stanley 1-45-530 rustfrit stål 60 cm
167,84 kr.
PDF
PDF
Lagerstatus 17 Produktkode 977522 Model 1-45-530 Garanti 2 år

Levering & returnering

Forventet levering onsdag den 2. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The Stanley Carpenter's square 1-45-530 is a stainless steel rafter and roofing square with a 600 x 50 mm body and a 400 x 8 mm tongue. It is designed for accurate layout and measurement in carpentry and roofing tasks, featuring embossed graduations and figures on work-hardened steel and a buffed finish with clear lacquer to resist rust. The tool includes a metric roofing table for quick roof pitch and rafter calculations and weighs approximately 698.5 g.

Advantages

Embossed graduations and figures on work-hardened stainless steel provide clear, durable markings that resist wear. The buffed finish with clear lacquer offers additional corrosion resistance. The combination of a 600 mm blade and 400 mm tongue gives a stable, familiar layout for common carpentry and roofing measurements. Metric roofing table simplifies pitch and rafter layout in metric systems.

Suitable for

  • Carpentry layout and marking
  • Roof rafter and pitch calculations
  • Measuring and squaring timber and sheet materials
  • On-site construction and workshop use

Key specifications

  • Brand: STANLEY
  • Model / MPN: 1-45-530
  • EAN: 3253561455308
  • Material: Stainless steel (work-hardened)
  • Blade (body) length: 600 x 50 mm
  • Tongue length: 400 x 8 mm
  • Graduations: Embossed metric markings
  • Weight: approx. 698.5 g

How to use

Place the square with the blade or tongue against the workpiece edge to establish a 90° reference. Use the embossed metric graduations for linear measurements and transfer marks directly from the blade or tongue. For roof work, consult the metric roofing table on the square to determine rafter lengths and pitches, then mark and cut accordingly. Maintain a firm, steady contact with the material to ensure accurate layout lines.

Recommendations

Keep the square clean and dry; wipe off debris and moisture after use. Store in a dry place to preserve the clear lacquer finish and prevent corrosion. Avoid bending or using the tool as a lever to maintain accuracy of the work-hardened steel.

Vigtigste egenskaber
  • Carpentry layout and marking
  • Roof rafter and pitch calculations
  • Measuring and squaring timber and sheet materials
  • On-site construction and workshop use
  • Brand: STANLEY
  • Model / MPN: 1-45-530
  • EAN: 3253561455308
  • Material: Stainless steel (work-hardened)
  • Blade (body) length: 600 x 50 mm
  • Tongue length: 400 x 8 mm
  • Graduations: Embossed metric markings
  • Weight: approx. 698.5 g

Specifikationer

Specifikationer
Firkantklingens længde
600 mm
Korrosionsbestandig
Ja
Måleenheder
mm
Materiale
Stål
Mængde
1
Produktfarve
Rustfrit stål
Produkttype
Tømrervinkel
Præget skala
Ja
Skalainddeling (metrisk)
2
Skalainddeling (tommer)
1/8
Tungelængde, firkantet
400 mm
Vægt
0.6985 kg
Prishistorik for de seneste 6 måneder
Tømrervinkel Stanley 1-45-530 rustfrit stål 60 cm
Aktuel
167,84 kr.
Laveste 7 d.
166,79 kr.
Højeste 7 d.
168,31 kr.
Ændring 24 timer
-0,01 kr.   0%
Ændring 7 d.
+1,05 kr.   +1%
Ændring 30 d.
-0,77 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Populære produkter i denne kategori

2
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier