Konto Kontakt
Din kurv
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

Udvidelsesprint Renkforce RF-4011279 RS‑232 Seriel grænseflade

Udvidelsesprint Renkforce RF-4011279 RS‑232 Seriel grænseflade
Udvidelsesprint Renkforce RF-4011279 RS‑232 Seriel grænseflade
213,88 kr.
PDF
PDF
Lagerstatus 844 Produktkode 2257993 Model RF-4011279 Garanti 2 år

Levering & returnering

Forventet levering onsdag den 9. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardPayPalApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The Renkforce Expansion Board RF-4011279 RS‑232 Serial Interface adds a standard RS-232 port to compatible host boards and controllers, enabling direct serial communication with legacy devices and instruments. Designed for integration into industrial, laboratory and development environments, the board provides reliable point-to-point data exchange, device configuration and basic control signals required by many serial peripherals. The product is intended for users who need to connect printers, measurement instruments, PLCs or other equipment that use the RS-232 protocol.

Advantages

This RS-232 interface board supports stable, long-established serial communication with simple wiring and low protocol overhead. It allows straightforward integration with existing systems, reducing the need for complex protocol converters. The design focuses on compatibility and robustness for continuous operation in non-demanding industrial and laboratory settings. Compact form and standard connector types facilitate installation on host boards or inside control cabinets.

Key specifications

  • Interface type: RS-232 serial port (asynchronous)
  • Physical connector: standard D-sub or equivalent serial connector compatible with RS-232 devices
  • Supported signal levels: compliant with RS-232 voltage levels for transmit, receive and control lines
  • Typical baud rate range: supports standard serial bit rates commonly used with RS-232 devices
  • Mounting: expansion board format for connection to host boards or controllers
  • Operational environment: suitable for laboratory and industrial applications with typical ambient conditions

How to use

Fit the expansion board to a compatible host board or controller following the host manufacturer’s instructions. Connect the RS-232 cable between the expansion board’s serial connector and the serial port of the target device. Configure communication parameters on both ends (baud rate, parity, data bits, stop bits and flow control) so they match, then open the serial port in your terminal software or host application to begin data exchange. Observe correct wiring for control signals if hardware handshaking is used.

Recommendations

Use shielded serial cabling and avoid running cables alongside high-voltage or high-current lines to reduce noise. Verify matching communication parameters before testing, and check the host board documentation for required mounting orientation and supply considerations. For installations in electrically noisy environments, consider adding transient protection on the host side.

Vigtigste egenskaber
  • Подключения последовательных принтеров и терминалов
  • Интеграции измерительных приборов и лабораторного оборудования
  • Связи с контроллерами и промышленными устройствами с RS-232
  • Использования в проектах разработки и отладки встраиваемых систем
  • Interface type: RS-232 serial port (asynchronous)
  • Physical connector: standard D-sub or equivalent serial connector compatible with RS-232 devices
  • Supported signal levels: compliant with RS-232 voltage levels for transmit, receive and control lines
  • Typical baud rate range: supports standard serial bit rates commonly used with RS-232 devices
  • Mounting: expansion board format for connection to host boards or controllers
  • Operational environment: suitable for laboratory and industrial applications with typical ambient conditions
Prishistorik for de seneste 6 måneder
Udvidelsesprint Renkforce RF-4011279 RS‑232 Seriel grænseflade
Aktuel
213,88 kr.
Laveste 7 d.
211,18 kr.
Højeste 7 d.
213,89 kr.
Ændring 24 timer
-0,01 kr.   0%
Ændring 7 d.
+2,71 kr.   +1%
Ændring 30 d.
0,00 kr.   0%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Populære produkter i denne kategori

2
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier