Vægdybel Fischer 72095

The Fischer 72095 screw anchor is a nylon wall plug engineered for secure fixing in brick and concrete. With a length of 50 mm and designed for a 6 mm drill diameter, this pack of 100 anchors suits medium-duty anchoring tasks where reliable pull-out resistance and stable seating are required. The plugs are supplied in a box that helps keep components organized on site and at home.

Advantages

These wall plugs offer consistent expansion behavior in solid masonry, providing dependable load distribution and reducing the risk of loosening over time. The 50 mm length gives greater embedment depth compared with shorter anchors, improving holding power for fixtures such as shelves, brackets, and light-duty supports. The uniform dimensions and smooth surfaces allow fast insertion and predictable performance with standard drills and screws.

Suitable for

• Fixing shelves and small cabinets to brick or concrete walls
• Mounting brackets, hooks, and light-duty supports
• Interior and exterior installations where solid masonry is present
• Professional building sites and DIY renovation projects

Key specifications

• Material: nylon/polymer
• Nominal length: 50 mm
• Recommended drill diameter: 6 mm
• Minimum drill hole depth: 60 mm
• Pack quantity: 100 pieces per box
• Suitable base materials: solid brick, concrete

How to use

Drill a hole of 6 mm diameter to a minimum depth of 60 mm in the chosen masonry. Clean the hole of dust and debris before inserting the plug to ensure proper expansion. Push the wall plug fully into the hole until the flange is flush with the surface. Select a screw compatible with the 6 mm plug and the fixture thickness, then drive the screw in until the fixture is held securely; avoid over-tightening which can damage the plug or the base material.

Recommendations

Use only in appropriate base materials such as solid brick and concrete; do not use these plugs in hollow blocks or soft masonry without prior testing. For higher loads or critical applications, check mechanical load ratings and use anchors designed for the specific load class. Store the box in a dry place to prevent contamination and keep components organized for easy access during installation.